na tranny in a tII?
... i have the na tranny will it work or can i swap the syncro?
The short answer is no.
The long answer is yes.
To do it you will need to run the n/a flywheel, clutch setup including slave cylinder and run a different driveshaft to connect to whatever rear end you have.
The long answer is yes.
To do it you will need to run the n/a flywheel, clutch setup including slave cylinder and run a different driveshaft to connect to whatever rear end you have.
dewey
Joined: Sep 2007
Posts: 580
Likes: 1
From: Minnesota
if you run that route, good luck... i think you should get the T2 tranny and run mazdatrix special driveshaft. the feeling in my T2 makes me think about why the guys o the forum say, stick to a T2 tranny or your na trannys gonna blow.
What do you mean you TII swapped your glx?
I presume you mean you swapped some TurboII components into your GXL. However, we need to know whether you swapped just the engine, or if you swapped transmission and/or rear end as well.
You need to provide adequate information in a coherent manner, and keep your questions in New Member Technical until you're capable of doing so.
I presume you mean you swapped some TurboII components into your GXL. However, we need to know whether you swapped just the engine, or if you swapped transmission and/or rear end as well.
You need to provide adequate information in a coherent manner, and keep your questions in New Member Technical until you're capable of doing so.
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 26
Likes: 0
From: pensacola fl
wowwwww alright this is so you can understant my adequate information in a coherent manner
[IMG]
[/IMG]
i swaped the TII motor into my GLX with the TII tranny and the new driveshaft with an LSD as well. i found my answer...
[IMG]
[/IMG]i swaped the TII motor into my GLX with the TII tranny and the new driveshaft with an LSD as well. i found my answer...
Thread
Thread Starter
Forum
Replies
Last Post
MidnightOwl
2nd Generation Specific (1986-1992)
1
Sep 25, 2015 10:24 PM