Alright, here's what my NA setup is going to be so far:
No emissions (obviously)
No PS/AC
No cats :-D Probably some N1's or I might go cheap
KYB AGX 4/8 adjustables
ground control coilovers
rb camber link
toe eliminator
poly bushings for all
cusco camber plates (will these work with the agx's?)
falken azenis 205/50R15 all around

Any suggestions/comments?

 

Don't forget to add in sway bars, swaybar endlinks, cusco front and lower arm, rear strut bar and LSD.

I recommend you get the K2rd package over the cusco camber plates. Because the k2rd package is cheaper, comes with camber plates and pillowball mounts.

 

Hmm... I was thinking about putting that off for now as I do have to fit a budget... I already have a 4.1lsd for the car, so that's not a big worry, rear strut bar is on the way already... I was thinking about just ordering the struts and coilovers with poly bushings to do for now and then finish up with the sway bars and endlinks and camber links at a later time. Any suggestions with what I can do for now?