2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Mystery nipples

Thread Tools
 
Search this Thread
 
Old 09-03-02, 04:21 PM
  #1  
adiabaticly inefficient

Thread Starter
 
T04Eneedy's Avatar
 
Join Date: Aug 2001
Location: nw houston,TX or w. hollywood,CA
Posts: 386
Likes: 0
Received 0 Likes on 0 Posts
Question Mystery nipples

ive got a 88 t2 with the upper intake mani. (pd failure).what does that little nipple in between the oil injectors go to? also what is that little metal deal that has 2 vacuum lines coming out of it is on the inside of the lower intake manifiold?what is it and where do the lines go?

Last edited by T04Eneedy; 09-03-02 at 04:23 PM.
Old 09-03-02, 05:10 PM
  #2  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
The one b/t the oil injectors is for the fuel injector bleeds. It supplies fresh filtered air from the back of the throttle body. DO NOT CONNECT A SOURCE OF VACCUM to this nipple. The suction comes FROM the nipple.

I'm lost on the LITTLE METAL DEAL. It might be part of the cold start system. Just a guess. I need a picture or try to describe it in a different manner. You did good on the first description, but its not making a connection in my head. Is one of the 2lines larger than the other/????
Old 09-03-02, 05:24 PM
  #3  
adiabaticly inefficient

Thread Starter
 
T04Eneedy's Avatar
 
Join Date: Aug 2001
Location: nw houston,TX or w. hollywood,CA
Posts: 386
Likes: 0
Received 0 Likes on 0 Posts
2 bolts

its held on by 2 nuts it is on the lower intake mani. and its above the oil injectors
Old 09-03-02, 07:56 PM
  #4  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
Its a piece thats not needed. Was part of a cold start system(cold start as zero degrees). I believe it injected fluid in the intake when the temp was reaaaaaaaal cold. Take the thing off and block the holes with JBWELD or make a simple blockoff plate with some rtv under it. SEe page 4B-90 of the 87fsm for a description of how and what it was/is. Called SUBZERO STARTING SYSTEM. Outlawed in the Western world. Its the only item I condone being taken off a engine. Should be able to cope with the rest of the items being left in place. But then again, its our cars and we'll do darn well what we want with our property.
Old 09-03-02, 08:58 PM
  #5  
Rotary Enthusiast

 
Join Date: Mar 2002
Location: Lagrange, KY
Posts: 827
Likes: 0
Received 0 Likes on 0 Posts
Damn, and i thought this was going to be something kinky.....
Old 09-03-02, 09:22 PM
  #6  
just dont care.

iTrader: (6)
 
jacobcartmill's Avatar
 
Join Date: Jul 2002
Location: Nashville, TN
Posts: 9,387
Likes: 0
Received 4 Likes on 4 Posts
yeah me too... my nipples are kinda small so i was thinking that my nipples could be mystery nipples... get it? damn...
Old 09-03-02, 11:10 PM
  #7  
What R U thinking self?

 
Rpeck's Avatar
 
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes on 0 Posts
Click here... https://www.rx7club.com/forum/showth...hreadid=110893

Are these the mystery nipples you are talking about?
Old 09-04-02, 03:23 PM
  #8  
Full Member

 
dmyers's Avatar
 
Join Date: Mar 2002
Location: Burlington, NC
Posts: 191
Likes: 0
Received 0 Likes on 0 Posts
You said mystery nipples.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
NotMrButts
1st Generation Specific (1979-1985)
25
02-10-18 06:36 PM
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
MidnightOwl
2nd Generation Specific (1986-1992)
1
09-25-15 10:24 PM
maikelc
3rd Generation Specific (1993-2002)
8
09-24-15 01:01 PM



Quick Reply: Mystery nipples



All times are GMT -5. The time now is 04:16 AM.