My car started this morning, but won't now! I NEED TO MOVE IT!
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: Seattle
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
My car started this morning, but won't now! I NEED TO MOVE IT!
Please help, any help will work, i am trying to deflood the car, i held the gas pedal down and it still won't crank, I am trying to find the EGI fuse but i can't locate it can someone please help? I am looking through the manuals but can't seem to find it. Thanks.
#3
ctrl + z my life
Join Date: Aug 2006
Location: Phoenix
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about the unflood procedure? what kind of rx-7 do you have?
my 87 turbo 2 likes to flood but it's not that hard to clear. open your hood and find the black relay box on the driver's side. Pull out the green inj relay and crank it for like 4-5 secs with the gas pedal down. Pop your relay back in, crank it, and that should start it up. oh yeah if your tach doesen't wanna work after the procedure, drive your rex until you pick up sufficient speed to do a rolling start, Leave the car in gear, step on you clutch, and turn off your engine. Turn the key to the notch before activating the starter and dump your clutch. after the car starts your tach should come back online.
my 87 turbo 2 likes to flood but it's not that hard to clear. open your hood and find the black relay box on the driver's side. Pull out the green inj relay and crank it for like 4-5 secs with the gas pedal down. Pop your relay back in, crank it, and that should start it up. oh yeah if your tach doesen't wanna work after the procedure, drive your rex until you pick up sufficient speed to do a rolling start, Leave the car in gear, step on you clutch, and turn off your engine. Turn the key to the notch before activating the starter and dump your clutch. after the car starts your tach should come back online.
Trending Topics
#8
Full Member
Thread Starter
Join Date: Aug 2006
Location: Seattle
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Mines a NA s5, I finally got it to crank BUT after running it around the block I noticed my car just isn't the same, I hear a weird noise that doesnt go away.
For the future, any way to PREVENT this from happening?
Thank you for the help.
For the future, any way to PREVENT this from happening?
Thank you for the help.
#13
Originally Posted by Funkspectrum
if it's an S4, floor it while cranking....it works just about every time.
Thread
Thread Starter
Forum
Replies
Last Post
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM