Muffler suggestions??
#1
Full Member
Thread Starter
Join Date: Sep 2006
Location: detroit
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Muffler suggestions??
ok i would love to hear some suggestions on different mufflers for my setup.
my setup is RB header into a straight pipe all the way to the back, no cats or nothing, just a 2.5 pipe. its going to be a single exhaust so im looking for a good muffler to finish it off with. its going to be loud as hell already so i dont want anything that will make it unbearable. throw some suggestions at me.
its for an 86 NA.
thanks.
my setup is RB header into a straight pipe all the way to the back, no cats or nothing, just a 2.5 pipe. its going to be a single exhaust so im looking for a good muffler to finish it off with. its going to be loud as hell already so i dont want anything that will make it unbearable. throw some suggestions at me.
its for an 86 NA.
thanks.
#2
your engine needs backpressure to make the 5/6 ports turn on... you car will be slow unless you rig the 5/6 ports..
and an open header rotary to louder than an open header v8 if that tells you anything..
and do a SEARCH here is the link https://www.rx7club.com/search.php
do yourself a favor and put atleast a resonator in to help with the rasp.
look at racing beats design on their website and copy it.
and an open header rotary to louder than an open header v8 if that tells you anything..
and do a SEARCH here is the link https://www.rx7club.com/search.php
do yourself a favor and put atleast a resonator in to help with the rasp.
look at racing beats design on their website and copy it.
Last edited by TriadMotors; 11-01-06 at 12:14 PM.
#3
Senior Member
iTrader: (2)
Join Date: Mar 2004
Location: Charlottesville, VA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
As far as a muffler to use, take the advice of the guys at Mazdatrix. The temperature of the rotary's exhaust gas is impressive. Make sure whatever you decide to use can withstand the heat. Even with a muffler, the system you've described is going to be loud.....maybe prohibitavely so.
#5
car fanatic
Join Date: Aug 2006
Location: northern new jersey
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
get a corksport cat-back with your header/strait pipe setup- if its the racing beat presilencer if seen this setup done a few times already. Yea and its gonna be loud! I have the racing beat header+ bonez hi flow cat+ corksport single cat back. Its friggin loud and i had to buy the silencer so that i dont attract too many cops.
#6
Full Member
Thread Starter
Join Date: Sep 2006
Location: detroit
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TriadMotors
your engine needs backpressure to make the 5/6 ports turn on... you car will be slow unless you rig the 5/6 ports..
and an open header rotary to louder than an open header v8 if that tells you anything..
and do a SEARCH here is the link https://www.rx7club.com/search.php?
do yourself a favor and put atleast a resonator in to help with the rasp.
look at racing beats design on their website and copy it.
and an open header rotary to louder than an open header v8 if that tells you anything..
and do a SEARCH here is the link https://www.rx7club.com/search.php?
do yourself a favor and put atleast a resonator in to help with the rasp.
look at racing beats design on their website and copy it.
im aware of this, im actually either wiring the ports or getting a silencer.
my question was about a muffler. thanks everyone for your answers but please lets stick to the original question. anyone got any suggestions on a muffler??thanks.
#7
Rotary Freak
Join Date: Sep 2003
Location: Wake Forest, NC
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by saywhat??
ok i would love to hear some suggestions on different mufflers for my setup.
my setup is RB header into a straight pipe all the way to the back, no cats or nothing, just a 2.5 pipe. its going to be a single exhaust so im looking for a good muffler to finish it off with. its going to be loud as hell already so i dont want anything that will make it unbearable. throw some suggestions at me.
its for an 86 NA.
thanks.
my setup is RB header into a straight pipe all the way to the back, no cats or nothing, just a 2.5 pipe. its going to be a single exhaust so im looking for a good muffler to finish it off with. its going to be loud as hell already so i dont want anything that will make it unbearable. throw some suggestions at me.
its for an 86 NA.
thanks.
Trending Topics
#8
Full Member
Thread Starter
Join Date: Sep 2006
Location: detroit
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
ok lets do this again.
ALL IM ASKING FOR ARE MUFFLER SUGGESTIONS.
im not trying to get any catback systems unless you guys want to ship them to my front door for free.
picture this.
i have an 86 na rx7. for exhaust i have the RB header hooked up to the silencer which is hooked up to the straight pipe. no muffler though. that's all im missing. and thats all im asking for. a muffler. what kind would you recommend. lolerrific!!
ALL IM ASKING FOR ARE MUFFLER SUGGESTIONS.
im not trying to get any catback systems unless you guys want to ship them to my front door for free.
picture this.
i have an 86 na rx7. for exhaust i have the RB header hooked up to the silencer which is hooked up to the straight pipe. no muffler though. that's all im missing. and thats all im asking for. a muffler. what kind would you recommend. lolerrific!!
#11
Senior Member
Join Date: Sep 2002
Location: "You take my car, I take your knee caps"
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
I had a rb header, with presilencer to N1's, and not only was it loud as hell, it was raspy! So raspy that I removed the header untill I can afford an RB catback. So, My recomendation would be an Racing beat muffler. And you should really try to get some kind of presiencer.
#12
Information Regurgitator
Racing Beat makes universal style Power Pulse mufflers for use in custom setups.
You could get one of those and have a nice tip welded on and you'd be ready to go. Very loudly I'm sure but it would be meant for a rotary. They come with I.D.s of 2.5 and 3 inches.
http://www.racingbeat.com/FRmazda2.htm
http://www.racingbeat.com/FRmazda2.htm
You could get one of those and have a nice tip welded on and you'd be ready to go. Very loudly I'm sure but it would be meant for a rotary. They come with I.D.s of 2.5 and 3 inches.
http://www.racingbeat.com/FRmazda2.htm
http://www.racingbeat.com/FRmazda2.htm
Last edited by Dak; 11-01-06 at 06:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post