motor swap not starting.....(searched)
06-15-05, 05:25 PM
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: Dublin, CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
motor swap not starting.....(searched)
I just put a used JSPEC motor into my 10th AE, went to start it and it wouldn't fire. It's cranking and getting fuel. I had to go to work so i haven't had time to check for spark.
Other than those three things, what should i check for? Any help would be greatly appreciated.
Shaun
Other than those three things, what should i check for? Any help would be greatly appreciated.
Shaun
06-15-05, 06:29 PM
#2
Senior Member
Join Date: Jan 2005
Location: Rancho Cucamonga Ca,
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Your right, Fuel + crank + spark = fire. You probably don't have spark. If you don't, you can do a search for possible causes. I would check for blown fuses and loose conectors at the ecu and CAS.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
sleepydogz
Old School and Other Rotary
8
10-04-15 03:46 PM
