motor swap not starting.....(searched)
 

I just put a used JSPEC motor into my 10th AE, went to start it and it wouldn't fire. It's cranking and getting fuel. I had to go to work so i haven't had time to check for spark.

Other than those three things, what should i check for? Any help would be greatly appreciated.

Shaun

Your right, Fuel + crank + spark = fire. You probably don't have spark. If you don't, you can do a search for possible causes. I would check for blown fuses and loose conectors at the ecu and CAS.

Thanks alot, ill check that tomorrow