2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Might be broke... might not.

Thread Tools
 
Search this Thread
 
Old 12-07-05, 10:32 AM
  #26  
88 RX-7 GXL

Thread Starter
 
Sepher0's Avatar
 
Join Date: Nov 2005
Location: Florida
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by spot_skater
A good rule of thumb for oil pressure is 10 lbs for every 1000 RPM...

At idle, 10 psi is good. @ 2k, 20 psi, 3k 30 psi, etc. etc.
If thats true... then mine is working fine (its near zero at 800 rpms "idle")


Originally Posted by sar
I think the big problem is that you're accelerating hard before the oil is warm.

Oil should have higher cold pressure and then drop to a lower pressure when warm.

Nothing wrong with using 10w30 (esp in winter) unless your oil seals are infact bad, but that is not necessarily your problem.

Let the engine fully warm and not letting off hard at high rpms reduces smoke.

If your oil is consistantly at 15psi I would suggest first changing it, even trying a heavier oil, but if your car has a lot of miles on it the oil pump can be wearing down, so be wary of that too.
Thanks for the help and the advice! I will check into that oil pump when i get a chance.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 06:47 AM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
manoflego
1st Generation Specific (1979-1985)
19
09-30-15 05:19 AM
meetRoX7e
General Rotary Tech Support
4
09-11-15 11:09 AM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: Might be broke... might not.



All times are GMT -5. The time now is 04:13 AM.