MazdaTrix Bumpsteer Correction
#1
Full Member
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: Central New York
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
MazdaTrix Bumpsteer Correction
Does anyone have experience with or know how good the MazdaTrix Bumpsteer kit for the FC is? How much correction does it give. I tried to get a straight answer from the guys at Mazdatrix, but got nothing but a run around. - No straight answers
http://www.mazdatrix.com/SteeringAngle.htm
I had heard from one source that the kit did not fit the spindles very well - hard to believe that, but need to check it out before I buy.
Any other options that are being used out there?
Picture attached is the FC part from MazdaTrix in case anyone can comment...
http://www.mazdatrix.com/SteeringAngle.htm
I had heard from one source that the kit did not fit the spindles very well - hard to believe that, but need to check it out before I buy.
Any other options that are being used out there?
Picture attached is the FC part from MazdaTrix in case anyone can comment...
#2
Full Member
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: Central New York
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
OK - if nobody is using the MazdaTrix parts (hard to believe) what are some other good solutions out there?
I figured a lot of people with radically lowered cars would be all over this.
I figured a lot of people with radically lowered cars would be all over this.
Thread
Thread Starter
Forum
Replies
Last Post