MazdaTrix Bumpsteer Correction
 

Does anyone have experience with or know how good the MazdaTrix Bumpsteer kit for the FC is? How much correction does it give. I tried to get a straight answer from the guys at Mazdatrix, but got nothing but a run around. - No straight answers


http://www.mazdatrix.com/SteeringAngle.htm


I had heard from one source that the kit did not fit the spindles very well - hard to believe that, but need to check it out before I buy.

Any other options that are being used out there?


Picture attached is the FC part from MazdaTrix in case anyone can comment...

OK - if nobody is using the MazdaTrix parts (hard to believe) what are some other good solutions out there?

I figured a lot of people with radically lowered cars would be all over this.

how low???












radically low??

ask the drift guys they seem to like em a lot. well the ones that run it at least from what ive seen

i got the steering angle kit on my car. well came with it. Its all good, this car is daily driven. Holding up good.

I would not say radically low - compared to what I think is stock it is about 1 to 1.25" off from the stock geometry.