2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

this looks like the end...

Thread Tools
 
Search this Thread
 
Old 08-25-01, 05:37 PM
  #2  
rawr

iTrader: (2)
 
Agent_D's Avatar
 
Join Date: Feb 2001
Location: Silver City, NM
Posts: 2,331
Likes: 0
Received 0 Likes on 0 Posts
reeks of gas and wont idle, sounds like your primaries or secondaries need new o-rings, i wouldnt know about the turbo parts because i dont know too much about the turbo's, i gotta buy one if anyone is selling theirs buy new o rings for all your injectors, put them back in and the gas should go away along with the erratic idle, as for the coolant from the FMIC and the no boost, i dont know im an n/a type guy lol
Old 08-25-01, 07:26 PM
  #3  
Full Member

 
tonyge's Avatar
 
Join Date: Feb 2001
Location: manchester,nh,usa
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
WANT TO SELL IT?FOR UNDER A GRAND?
Old 08-25-01, 07:35 PM
  #4  
Senior Member

 
Brian P's Avatar
 
Join Date: Feb 2001
Location: White Rock BC
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts
Delta isn't that far from me, bring some beer and we'll fix it up.

BTW, your intercooler shouldn't have coolant in it.

Might want to check and see if the bar is attached to the wastegate on the turbo, I had this happen once when I first put the engine in, I forgot to put the clip on the rod so the wastegate was stuck wide open ,

Not going over 5k sounds like you have a crack in your turbo inlet duct (pipe from airflow meter to turbo) which is a very common problem. This can be fixed courtesy of Home Depot Performance

drop me an email

brianper@home.com
Old 08-26-01, 03:45 AM
  #6  
Senior Member

 
Brian P's Avatar
 
Join Date: Feb 2001
Location: White Rock BC
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts
No start could be a bunch of things, how long do you crank before it starts?

Does it smell like gas?

Could be your injectors are leaking, or even a big vacuum leak? I mean its turbo so hoses can blow off.. Did you check to see if it is sparking when it isn't starting?

Have you had a chance to have a good look at your turbo inlet duct?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotarybeat1287
2nd Generation Non-Technical and pictures
8
12-09-09 01:05 AM
funkjaw
Racing Kills Lounge
6
11-23-09 11:43 PM
dkwasherexd
2nd Generation Specific (1986-1992)
10
08-22-09 01:41 PM
dr. wombat
1st Generation Specific (1979-1985)
6
08-21-09 10:46 PM
cumberlandrx7
2nd Generation Specific (1986-1992)
9
08-11-09 12:15 PM



Quick Reply: this looks like the end...



All times are GMT -5. The time now is 01:47 PM.