Leaky top
#1
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: Jacksonville, Florida
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Leaky top
Do any of you other vert owners have this problem. I have a new top < the guy I bought it from said so anyway >, it looks immacualate<sp?>. The only problem is that when it tains hard it seems to drip in from the top of the window. It seems like it just doesnt make a seal there or something. Could that rubber piece on the edge of the top be at fault.
BTW it does this on both sides.
Thanks.
BTW it does this on both sides.
Thanks.
#2
Former Moderator. RIP Icemark.
Probably the targa sections middle seals, Victoria british has them for just under $50 for each side.
The window and roof wears them out internally after a while, so they don't seal as well when they get old.
You probably have some wind noise from that area as well when driving with the top up, if they are worn out.
The window and roof wears them out internally after a while, so they don't seal as well when they get old.
You probably have some wind noise from that area as well when driving with the top up, if they are worn out.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM