2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Leaking injectors causing flood? help ASAP

Thread Tools
 
Search this Thread
 
Old Nov 17, 2005 | 07:27 PM
  #1  
311unity13B's Avatar
Thread Starter
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
Leaking injectors causing flood? help ASAP

88 GXL

ok, I am pretty sure i am having a flooding problem

the only way to get my car started is if remove the EGI fuse, crank on it, hold pedal to floor, and have someone put in the EGI fuse while I am cranking and holding pedal to floor, then it fires

what can cause this? leaking injectors?
Reply
Old Nov 17, 2005 | 07:53 PM
  #2  
Mindspin311's Avatar
Powered By Trochoids
Tenured Member 05 Years
 
Joined: Oct 2004
Posts: 1,457
Likes: 0
From: Philly | PA
its because you are a 311 fan
Reply
Old Nov 17, 2005 | 08:00 PM
  #3  
Smoken''s Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2002
Posts: 1,515
Likes: 2
From: Andrews TX
Leaking injectors, low compression, bad plugs, or it could also be caused by the starter turning over to slowely. If it the starter speed sounds normal, then check your compression and plugs, if thats good, get your injectors cleaned.
Reply
Old Nov 17, 2005 | 08:02 PM
  #4  
311unity13B's Avatar
Thread Starter
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
it runs fine after it starts, power is there
Reply
Old Nov 17, 2005 | 08:23 PM
  #5  
Godzilla-T78's Avatar
Banned. I got OWNED!!!
 
Joined: Jun 2003
Posts: 1,619
Likes: 0
From: Central Florida
i have simular isues but mine wont idle.. good compression btw..
Reply
Old Nov 17, 2005 | 08:34 PM
  #6  
311unity13B's Avatar
Thread Starter
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
last tank, i ran fuel injecctor cleaner as well, and now this problem
Reply
Old Nov 17, 2005 | 08:40 PM
  #7  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Tried changing the plugs yet?
Reply
Old Nov 17, 2005 | 09:22 PM
  #8  
Carzy Driver's Avatar
Law Breaker
Tenured Member: 15 Years
 
Joined: Oct 2005
Posts: 3,333
Likes: 0
From: S.F. Bay Area, California 510
have you changed or checked your air filter lately?
Reply
Old Nov 17, 2005 | 09:26 PM
  #9  
swiftfc's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 163
Likes: 0
From: Anaheim, CA
i have the same problem and it seems that my starter speed is a lil low is it hard swapin it out?
Reply
Old Nov 17, 2005 | 09:31 PM
  #10  
311unity13B's Avatar
Thread Starter
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
nah, starters are easy

its not my starter, i know that
Reply
Old Nov 17, 2005 | 09:56 PM
  #11  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
check plugs
Reply
Old Nov 18, 2005 | 12:05 AM
  #12  
Carzy Driver's Avatar
Law Breaker
Tenured Member: 15 Years
 
Joined: Oct 2005
Posts: 3,333
Likes: 0
From: S.F. Bay Area, California 510
check air filter, sounds like getting enough gas but not enough air which would cause you to need a running start so to say
Reply
Old Nov 18, 2005 | 06:18 PM
  #13  
311unity13B's Avatar
Thread Starter
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
Originally Posted by carzy driver
check air filter, sounds like getting enough gas but not enough air which would cause you to need a running start so to say
hahahhaa, yeah right
Reply
Old Nov 18, 2005 | 06:46 PM
  #14  
gxl88's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2005
Posts: 5
Likes: 0
From: Central Florida
lmao i had the same god damn problem >< you may need new fuel injectors or it's a vacuum leak, what I did was took out my injectors cleaned them good with engine degreaser and put them back in and started her up, it would only stay running for about 10 seconds inless i kept my foot on the gass to keep her alive >< today we took it to the street and found that I had about 3 vacuum leaks. fixed that issue, now she runs like a champ. good luck bro
Reply
Old Nov 18, 2005 | 08:28 PM
  #15  
Chief_MC's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 255
Likes: 0
From: Kiev, UKRAINE
Originally Posted by 311unity13B
last tank, i ran fuel injecctor cleaner as well, and now this problem
Mate, that's exactly it! I've had almost the same problem 2 years ago with a Redex injector cleaner added to a tank... You see it really takes the dirt and debrys away from where it residues... but not only from injectors... your fuel lines, tank... and some small particles of dirt could clog one or more of your injectors keeping them from complete closing state (it can be a micron sized piece) and as a result it starts leaking a residual fuel pressure into a combustion chamber washing away your oil film that makes compression...

i'd recommend you to clean your injectors...

This injector cleaner is good only for regular use... Like once in a half year... If you never did it before you will possibly get what you have now...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
R7rexy
3rd Generation Specific (1993-2002)
19
Sep 2, 2015 10:24 AM




All times are GMT -5. The time now is 04:17 AM.