Just bought a 2nd Gen
#1
Senior Member
Thread Starter
Join Date: Aug 2001
Location: Tampa, FL
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Just bought a 2nd Gen
My stepson totaled my 91 Miata, so I traded it as a parts car for a running '87 RX-7. This is a base model with 196K on original engine. No dings, only a scrape here and there. Interior is clean, 14" phone dial rims, ....no power windows, no sunroof, no cruise control, no turbo, no smoke......, just a functioning car.
This will be my daily driver (about 40 miles roundtrip for work).
It is White w/black pinstripe and Blue interior
The only thing wrong is the driver seat is ripped at the left lumbar......
Can 3rd Gen seats fit in a 2nd Gen??
If so, I have an extra set from my '93 VR RX-7.....they were cloth & I replaced them with leather.
There are no mods to this car......everything is stock except the Alpine CD player.
So now I'm a multiple rotary owner!
This will be my daily driver (about 40 miles roundtrip for work).
It is White w/black pinstripe and Blue interior
The only thing wrong is the driver seat is ripped at the left lumbar......
Can 3rd Gen seats fit in a 2nd Gen??
If so, I have an extra set from my '93 VR RX-7.....they were cloth & I replaced them with leather.
There are no mods to this car......everything is stock except the Alpine CD player.
So now I'm a multiple rotary owner!
#4
Former Moderator. RIP Icemark.
Originally Posted by Foz'sRX-7
Can 3rd Gen seats w/out rails fit a 2nd Gen?
If you would have searched you would have found that they can be made to fit with custom mounting... but they do not in any way bolt in.
Last edited by Icemark; 09-18-04 at 09:19 PM.
Trending Topics
#8
by lumbar do you mean the side part on the bottom or the top? because mine had a rip at the bottom, right where the vynal and cloth came together and it kept getting worse. i glued it together with shoe goo, and its held together great.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM