Qhasan31

Ok I at this sight http://wwwhightempsilicone.com right, and I don't know what I need to get for just a stock intercooler....... I just need to replace the hoses couplers or whatever they are called, cuz it's killin me that my boost isn't where it needs to be at.....so if anyone can help with this that would be awesome, thank you

Hasan

tandolla

iTrader: (1)

do you need stock intercooler coupler? i got a complete set. ?

Qhasan31

yeah i need a set but I'm lookin' for aftermarket, cuz I don't want the hoses to blow again......

tandolla

iTrader: (1)

i know you will need some 2" and i beilive some 2.5" but you would need 90 degree angle couplers as well..

Qhasan31

What type of couplers ply would I need 3 ply or 4 ply....... to my understanding 4 is greater than 3 of course, 4 ply will be stronger and it looks like on the site is says 500F meaning it is usable under the conditions of 500 degrees?

tandolla

iTrader: (1)

yes. but i think 3ply would be fine but if you want you can do 4ply for that extra insurance. i dont think the air inside the IC pipes get past 500

riverzendz

You can buy after market silicone couplers made specifically for the FC from Samco or OBX.

compuskills

or just get 2 90 degree elbows 2" inner diameter.