Well after inspecting it, it seems to be really cracked at the turbo end. I believe this was causing my rough idle....My question is where can I get a replacement? Can I get it in something else besides plastic? Thanks in advance,
Hassell

 

its called a TID, those 2 90° bends are VERY restrictive, get an aluminum pipe or something similar and swap it out! and if you dont already have a cone filter get that too, so you can put it on the end or the AFM..

 

i had my old plstic i come loose and it gave me idle issues too.
i used some ducktape to fix it up and was a ok.
but now have stage 2 with 3 in inlet and custom TID
Mazdatrix may have.

 

old pic but this is what it looks like -

 

so that's what a TDI is.....no wonder u got irritated in that thread you made and I posted something about the plastic pipe.....I didn't know what a TID was....ok now I know.....Thanks.....BTW where can I get one?
Hassell " And knowing is half the battle"

 

Mazdatrix sells them. Or you can try the for sale section. Or you can duct tape your current one back together

Steve

 

no...no duct tape!!!! i will check out Mazdatrix...thanks
Hassell

 

for a nice looking tid..juss buy a generic honda civic intake..it should have a 45 degree bend in it...cut it the length it needs to be..attach the afm then get a air filter and bam u have a 2.5- 3 inch tid. be careful though ur boost will probabaly go up with this...also if u have a s4 u need an adapter plate for the afm to put a air filter on instead on the air box so check that out...u can get the adapter on ebay for lik 10 bucks shipped.