2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

instrument dash

Thread Tools
 
Search this Thread
 
Old Nov 30, 2007 | 02:45 PM
  #1  
SmokinRx-7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 260
Likes: 0
From: cobb, CA
instrument dash

for some reason i was drivin my 90 gxl and the ebrake light came on.. it wont turn off and it isn't on... it is disengaged and i dont know y its doing it... ne suggestions on how to fix or wat is the problem.. so ne help appreciated
Reply
Old Nov 30, 2007 | 02:49 PM
  #2  
Hazard15301's Avatar
Rotor Junkie
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Sep 2006
Posts: 1,007
Likes: 1
From: Washington, PA
Mine did this all the time. I never figured out why, but sometimes if I'd crank it back real hard and put it back down all the way it would fix it.
Reply
Old Nov 30, 2007 | 05:08 PM
  #3  
Lizo7's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (11)
 
Joined: Feb 2006
Posts: 493
Likes: 0
From: Williamsport, PA
the light doubles as a reservoir low warning.

do your self a favor and fill it up since its probably leaking.

while your at it, find the leak

Matt
Reply
Old Nov 30, 2007 | 05:39 PM
  #4  
Eva001Ikari's Avatar
Working on my car.
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 594
Likes: 0
From: Los Angeles, CA
wow, it doubles as a resivoir low warning??

Never knew that, well it could be a bad ground or something because my coolant level light would come on sometimes and just stay on for like 20 mins straight while i'm driving and it was so god dam loud. When i finally got my car to cool down and i checked the coolant and **** the damn radiator was full!!! So i just grounded the wire better =D
Reply
Old Nov 30, 2007 | 09:57 PM
  #5  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Low brake fluid warning.
Reply
Old Nov 30, 2007 | 10:00 PM
  #6  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
also could be a bad solder joint in the cpu
Reply
Old Nov 30, 2007 | 10:06 PM
  #7  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
No it couldn't, since the CPU has nothing to do with this.
Reply
Old Nov 30, 2007 | 10:10 PM
  #8  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
really? i had the same problem with my "BELTS" light and i remember someone advising that it was bad solder joints in the cpu. i never checked the problem and the light remains on when the ignition is off. i will trust your advice and retract my previous statement.
Reply
Old Dec 1, 2007 | 05:20 PM
  #9  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
The BELTS light is controlled by the CPU, the BRAKE light is not.
Reply
Old Dec 1, 2007 | 05:36 PM
  #10  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
thank you for the clarification. my mistake.
Reply
Old Dec 1, 2007 | 07:59 PM
  #11  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Sometimes it pays to read the owners manual...


-Ted
Reply
Old Dec 1, 2007 | 09:49 PM
  #12  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
very true. i have the original owners manual for my 88 10AE and the pages are literally falling out. the thing is in excellent shape otherwise. just kind of frustrating to read when a section of pages goes flying to the floor. the previous owner must have cut the 10AE logos out of the floor mats, as i found them stuffed in the grey owners manual folder.
Reply
Old Dec 1, 2007 | 10:21 PM
  #13  
Lizo7's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (11)
 
Joined: Feb 2006
Posts: 493
Likes: 0
From: Williamsport, PA
Originally Posted by NZConvertible
Low brake fluid warning.
My bad, I figured since it is a "brake light" everyone knew we were talking brake stuff

Matt
Reply
Old Dec 1, 2007 | 10:43 PM
  #14  
cmanns's Avatar
Smoke moar
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 2,530
Likes: 1
From: The yay, California
Originally Posted by SmokinRx-7
for some reason i was drivin my 90 gxl and the ebrake light came on.. it wont turn off and it isn't on... it is disengaged and i dont know y its doing it... ne suggestions on how to fix or wat is the problem.. so ne help appreciated
When you have the ebrake up does the light get brighter? then your low on brake fluid.
Reply
Old Dec 1, 2007 | 10:46 PM
  #15  
44alejitos's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 6
Likes: 0
From: el paso tx
na i think its just a short...it doesnt happen on my car but i have a truck that always does that...its a short
Reply
Old Dec 1, 2007 | 11:39 PM
  #16  
NZConvertible's Avatar
I'm a boost creep...
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
Originally Posted by 44alejitos
na i think its just a short...
No, it's exactly what has already been said: low brake fluid.

Bad guesses are unhelpful...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sh00bs
1st Generation Specific (1979-1985)
3
Oct 1, 2015 11:57 PM
vish86
Interior / Exterior / Audio
3
Oct 1, 2015 11:53 PM




All times are GMT -5. The time now is 06:13 PM.