2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

I'm new to you and Turbo II

Old Feb 4, 2004 | 08:13 PM
  #1  
Johnny O Stallings's Avatar
Thread Starter
Newbie
 
Joined: Feb 2004
Posts: 3
Likes: 0
From: Bethlehem, Ga.
Cool I'm new to you and Turbo II

I just got my first RX Turbo! Always loved its styling, but don't know much about it. This baby is black w/grey interior. It has been sitting for several years in a nearby yard. Flat tires, dead battery ,old gas, and fouled plugs. Found a few dents and dings once all the leaves and dirt washed off. Plugs, fresh juice and high voltage brought her back to life. One problem immediately apparent is boost guage flat lined below 5000rpm. This phoenix is sporting only 89m on odometer, and seems to be hitting on all sides of both rotors. My knowledge and experience with these creatures is very limited. My goal is to return her to her former glory. Advice and direction will be much appreciated. Asking for a Mazda guru to let me be their protege (pun intended) as I persue her reserrection. What should I be checking and looking for, what are the common characteristics and headaches that my new love will share with me?
Reply
Old Feb 4, 2004 | 10:25 PM
  #2  
13bpower's Avatar
s4 for life
Tenured Member 15 Years
 
Joined: May 2002
Posts: 2,516
Likes: 1
From: Oahu
So it is running? Running good? Need more clear detail on what the problems are with the car, and what stage of drivability it is currently in.

Congrats on the purchase. You will learn to love it.
Reply
Old Feb 5, 2004 | 05:02 AM
  #3  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
http://fc3spro.com/TECH/h2b.html



-Ted
Reply
Old Feb 5, 2004 | 05:48 AM
  #4  
Johnny O Stallings's Avatar
Thread Starter
Newbie
 
Joined: Feb 2004
Posts: 3
Likes: 0
From: Bethlehem, Ga.
Thanks a million Ted! And to 13bpower- she is running, has stable but high idle, copious smoke, coolant leaks in several places, probably not road-worthy. Wouldn't trust braking system. Did pull compression test removing check valve from tester- she's got 80 psi peaks three times on each rotor from trailing holes. Found minor curb damage under pass. front bumper pushing liner out and brake cooling duct out of line. Driver's door top corner flexed out from attempted forced entry and rear hood corner on driver's side out of alignment- suspect hinge problem. Starting to take inventory of obvious necessary repairs mechanically first, then will consider cosmetics. Still undecided as to persuing performance mods or remaining stock. You guys will be my sounding boards and mentors. Any and all imput is appreciated. I am also noting everyone uses nicknames- I'm JohnnyO
Reply
Old Feb 5, 2004 | 09:47 AM
  #5  
SureShot's Avatar
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
It sounds like the one I found 4 months ago.
It took me $1500 in parts & 80 hours of work to get it road worthy.

Work on getting it back to stock shape before starting mods or you may end up chasing your tail.

The stock turbo power is pretty strong.
I had to learn to drive all over again.

I took it to the strip after 1 month 15.1sec@91MPH
Reply
Old Feb 5, 2004 | 10:22 AM
  #6  
Madrx7racer's Avatar
Banned. I got OWNED!!!
 
Joined: Nov 2002
Posts: 312
Likes: 0
From: San Jose, CA
Welcome to the club....let us know of your progress

Hassell{}
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
Feb 26, 2021 10:12 PM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
ChrisRX8PR
Single Turbo RX-7's
18
Aug 21, 2015 01:56 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:13 PM.