RX7Club.com - Mazda RX7 Forum

2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

if someone broke the rod for the aux ports that goes into the lim.....?

Thread Tools
 
Search this Thread
 
Old Apr 7, 2005 | 10:00 AM
Share
  #1  
lastphaseofthis's Avatar
lastphaseofthis
Thread Starter
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
Question if someone broke the rod for the aux ports that goes into the lim.....?
if someone broke the rod for the aux ports that goes into the lim could it be sucked into the rotor housing and cause major damage?
Reply
0
Old Apr 7, 2005 | 10:24 AM
Share
  #2  
SureShot's Avatar
SureShot
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
If the broken tip was small enough to get loose - yes.
Reply
0
Old Apr 7, 2005 | 10:37 AM
Share
  #3  
JamesBong's Avatar
JamesBong
Yes, that is my name.
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 519
Likes: 0
From: Santa Cruz Mtns
On the other hand, If the rod was broken with the aux port closed, wouldn't it stay closed? That would result in no air flow, no danger, and no power.
Reply
0
Old Apr 7, 2005 | 11:15 AM
Share
  #4  
lastphaseofthis's Avatar
lastphaseofthis
Thread Starter
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
Originally Posted by JamesBong
On the other hand, If the rod was broken with the aux port closed, wouldn't it stay closed? That would result in no air flow, no danger, and no power.
so as long as its not pass the point of no return its fine, gonna yank the lim off tonite(got gaskets) *cross fingers*
Reply
0
Old Apr 7, 2005 | 01:18 PM
Share
  #5  
lastphaseofthis's Avatar
lastphaseofthis
Thread Starter
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
how long do yall think she'll run on one rotor if i did brake some apex seals?
Reply
0
Old Apr 7, 2005 | 06:18 PM
Share
  #6  
JamesBong's Avatar
JamesBong
Yes, that is my name.
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 519
Likes: 0
From: Santa Cruz Mtns
From what I've understood, reading this forum; it's not a good idea to run it on one rotor.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hogged out vs boost prepped (Nikki)
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
East Coast Tuning Session #2 with "thewird (SPRING 2016!)
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
rebuild and porting
josef 91 vert
2nd Generation Specific (1986-1992)
14
Sep 17, 2015 09:22 PM
Power Window buttons - Drivers Side
Apoc3D
2nd Generation Specific (1986-1992)
10
Sep 5, 2015 10:24 AM
Back to Subforum
2nd Generation Specific (1986-1992)
View Next Unread
what wing is this??




Advanced Search

All times are GMT -5. The time now is 09:03 AM.