If I were to get some 16x8 wheels...
Thread Starter
Back from teh deadly!
Joined: Feb 2001
Posts: 1,163
Likes: 0
From: Louisville KY 40299
If I were to get some 16x8 wheels...
What offset would I need?
I can get +15, +30, +38, or +42.
I know stock is +40 so Im gonna want less than that, but I dont know how much. Can I just get +30? If my math is right, I think I can get away with that.
Stock wheel is 7" wide. New wheel is 8" wide so thats .5" on each side.
2.54cm = 1" so 1.27cm = .5" = 12.7mm
Stock offset is 40mm so ideally id want 27mm. 30 is the closest they have.
Would I be ok with that?
I can get +15, +30, +38, or +42.
I know stock is +40 so Im gonna want less than that, but I dont know how much. Can I just get +30? If my math is right, I think I can get away with that.
Stock wheel is 7" wide. New wheel is 8" wide so thats .5" on each side.
2.54cm = 1" so 1.27cm = .5" = 12.7mm
Stock offset is 40mm so ideally id want 27mm. 30 is the closest they have.
Would I be ok with that?
Thread
Thread Starter
Forum
Replies
Last Post
Pouya
Suspension/Wheels/Tires/Brakes Archive
35
Mar 9, 2006 08:50 AM
xander
1st Generation Specific (1979-1985)
13
Mar 24, 2004 05:56 PM
Mn_Drift_FCon
Suspension/Wheels/Tires/Brakes
13
Sep 26, 2003 12:23 PM