I remember some time back there was somthing here about a Turbo Kit for the NA's on here.
Would it be worth doing?
And Duz anyone have Linkz

 

seriously... Is it THAT difficult to type the other two letters in 'does' and put an 's' at the end of 'links'? You wouldnt look so dumb typing if you did that.


And before anyone else can say it: Search.


BC

 

lmao, yeah search. theres about 5 beeellion threads on turboing n/a's


I'm building my turbo ii to use s4 n/a rotors (high compression turbo) but I'm going w/ a nice standalone, a fresh engine and more new parts than you could shake a stick at.



people have pulled it off on stock ecu and piggybacks, but i wouldnt bother without a standalone.
you also need a good intercooler setup or water or alky injection if you want to run much more than 10psi.
a proper turbo setup helps a lot.


people have used the stock turbos from the t2's on N/A motors with a weber sidedraft style fuel injected two barrel throttlebody setup
and some have made exhaust spacers to go between the block and manifold to make the turbo clear the n/a's lower intake manifold.


it is by no means a slap a turbo on sort of project if you want to keep the car running for very long.


not to mention the condition of the motor that you're turboing

 

OMG



Here i did the work for you.....No please please dont get up

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frankenstein-motor-pics-inside-610501/

 

There are no kits.

All this information is in the FAQ.

Please search "turbo NA", "turbo 6 port", etc.

This has been covered 10,000 times in the last 30 days.

Thread closed.