I need teh size of teh heater hoses and the coolant hoses ... all of them?
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
I need teh size of teh heater hoses and the coolant hoses ... all of them?
hey guys im doing teh rebuild in less than 2 weeks... its taking me so long cuz 1k is alot of money for a poor hispanic kid thats 18 years old. Anyways thank you for helping me on my thread about my car not starting afer premix.. anyways i need to know what size diametter and lenght do i need to get for the coolant hoses around the TB and the manifolds.. also i need the sizes for all the heater hoses and the sizes for the 90degre and weird shape lines ( are those vacumm line sif so,, nevermind cuz i have the vacumm lines sizes ) anyways any otehr weir dshape lines to... also don't forget the line by the air intake ( damn thats a vacuum too right )...
anyways all the lines yeah! thank you gusy u are the best friend a lonely fat hispanic kid can have.. ( not including my 1988 rx-7 n/a GXL edition!! )
anyways all the lines yeah! thank you gusy u are the best friend a lonely fat hispanic kid can have.. ( not including my 1988 rx-7 n/a GXL edition!! )
#5
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
most of them are pre shaped and fitted... you are better off getting them from the dealership.
the heater hoses and one under the TB will be a pain unless you get the pre bent ones made to fit.
the heater hoses and one under the TB will be a pain unless you get the pre bent ones made to fit.
#6
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
so which ones are they 3/8ths or 5/11??? an dhow much feet of them should i get for the entire engine?
also inee dto know how much feet of the coolant bypass lines i need???.. whats a good way of pulling them all the way threw? i keep making holes on the hoses i buy with the pliers
also inee dto know how much feet of the coolant bypass lines i need???.. whats a good way of pulling them all the way threw? i keep making holes on the hoses i buy with the pliers
#7
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
WHICH ONES ARE THEY!!! is getting close to getting the engine out of the car ( 2 days max ).. I need you guys to help me figure the hoses sizes and lengths!!
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
ok so guys here we go: this is all i need and i should be ok right?
3.5mm= 22ft
6.0mm= 6ft
10mm= 2ft
3/8"= 10 ft
This will include every vacuum and coolant bypass/ fuel hose in the entire car? My car is a non-turbo 88 by the way... I'm I missing anything.... the only thing i have taken out is the oil metering pump and the 4 oil metering pump lines along with the oil injectors ( I went premix) so i don't ned that one vacuum hose that goes on top of the T/B so besides that i should be set right?
3.5mm= 22ft
6.0mm= 6ft
10mm= 2ft
3/8"= 10 ft
This will include every vacuum and coolant bypass/ fuel hose in the entire car? My car is a non-turbo 88 by the way... I'm I missing anything.... the only thing i have taken out is the oil metering pump and the 4 oil metering pump lines along with the oil injectors ( I went premix) so i don't ned that one vacuum hose that goes on top of the T/B so besides that i should be set right?
Last edited by vegeta6263; 05-20-03 at 09:32 PM.
#10
Do you have your full emissions system in tact? Mine is fully removed and I used:
10mm - 24 inchs
6mm - 50 inchs
4mm - 60 inchs
3/8 fuel line - 72 inchs
Mind you I have a boost gauge and a MBC which adds quite a bit of hose onto the list.
But what you have on your list should cover your car.
10mm - 24 inchs
6mm - 50 inchs
4mm - 60 inchs
3/8 fuel line - 72 inchs
Mind you I have a boost gauge and a MBC which adds quite a bit of hose onto the list.
But what you have on your list should cover your car.
#11
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
yes everything is intact...
so basically all i have taken out is the OMP and the OMP components.. oh And all teh A/C **** except fo rthe compressor cuz i stripped the bolts can u help me on that? how to get it out?
yeah so u used 4mm instead of 3.5 easier fit?
so basically all i have taken out is the OMP and the OMP components.. oh And all teh A/C **** except fo rthe compressor cuz i stripped the bolts can u help me on that? how to get it out?
yeah so u used 4mm instead of 3.5 easier fit?
#12
Honestly .5mm is not a big difference when talking about vac line (it stretchs). If you use 3.5mm just put a little KY on the nipples... makes it easier to slide them on.
#16
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
3.5mm= 22ft
6.0mm= 6ft
10mm= 2ft
3/8"= 10 ft
Come one guys .. anyways all my emmisons are intact excpet for one lonenly vacumm line i took of due to premixing... so do teh sizes and lengths above sound good enough?? what about the big *** hose attached to the engine.. has anyone in this forum ever replaced every single hose.. i man every single one? i have a 88 N/A
6.0mm= 6ft
10mm= 2ft
3/8"= 10 ft
Come one guys .. anyways all my emmisons are intact excpet for one lonenly vacumm line i took of due to premixing... so do teh sizes and lengths above sound good enough?? what about the big *** hose attached to the engine.. has anyone in this forum ever replaced every single hose.. i man every single one? i have a 88 N/A
#17
I doubt youll need 22ft of 3.5mm. Or 10ft of 3/8. But its always good to have some spare stuff laying around. And KY is a sex lubricant. Works pretty well when trying to fit something into a tight hole
#18
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Gainesville, FL
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
can i buy it at walmart?... can i use anything esle besides ky or whatever... i don't wann aask the guy ta walmart... where are the sex lubricants sir?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM