HKS

i from Costa Rica and i need a settings for the Super AFC, for my Mazda..
ok

My email is Sr20de26@hotmail.com

Samps

settings will be determined by a number of different things. The only way to tune it properaly is to get it on a dyno.

HKS

ok thank, you, do you watch my car, is a 13B........
ok

Samps

Looks like you are still learning English. I'm not exactly sure what you just said or asked but your car does have a 13b in it. Your car looks to be in preaty good condition. If you have any other questions, don't be afraid to ask.





Be nice people!!!

HKS

yes, my english is very difficult her, i speak spanish, but i need a ECU, for boosting more PSI, i watch a ECU "AEM" but i dont know that it works in my car.
ok thanks..

HKS

more pics of My RX-7 Turbo II 1988

Scott 89t2

how much boost are you running now? what other stuff do you have?

are you looking for the fuel % numbers to tune it? or are you looking for the settings to make the car run?

type flap. (86-88) 4 in 4 out (89-92) 5 in 5 out

arrow up to the right.

wiring

http://www.1300cc.com/howto/how2/safc.htm


if you are looking for fuel numbers you need your own. you really need a dyno with a wide band o2 sensor to tune it.

also you can't run more boost unless you have a "fuel cut defender"

HKS

my car boost 10 PSI, with a Turbo XS "manual key".
ok

Samps

Looks like you need new front tires before anything.

HKS

no no , ia have new front tires, i need a especial ECU, for boost more.
ok

Scott 89t2

for more then 10psi first you need a bigger fuel pump. and you will want bigger injectors.

get a walbro 255 fuel pump. $120 usd or so. then two 720cc secondary injectors for around $100usd each.

then tune them with the S-afc. should be good for 12-14psi.

do you have a FCD "fuel cut denfencer" ? you must if you have 10psi?

stock Intercooler?