2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

I just Ran engine Codes, Got a "30" ???

Thread Tools
 
Search this Thread
 
Old Sep 3, 2002 | 09:56 PM
  #1  
RangerJoeEOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 131
Likes: 0
From: Roswell, GA
Question I just Ran engine Codes, Got a "30" ???

I got teh how too sheet from 1300cc.com and read the code 30 but his list dose not list a 30. It was 3 long flashes and repeat. Dose any one have a complete list of codes? BTW i have an 89 GTUs Thnaks
Reply
Old Sep 3, 2002 | 10:25 PM
  #2  
deadRX7Conv's Avatar
Opinions are like........
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 879
Likes: 1
From: Prov RI
Try 03 if it isn't 30

Just scroll down to the bottom!
http://www.1300cc.com/howto/how2/codes.html

http://home.rmci.net/panther/89_91ecu.htm
Reply
Old Sep 3, 2002 | 10:31 PM
  #3  
Scott 89t2's Avatar
SOLD THE RX-7!
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
scroll down The FSM has it split up like that.... I just copied it.

split air solenoid valve
Reply
Old Sep 4, 2002 | 05:18 PM
  #4  
RangerJoeEOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 131
Likes: 0
From: Roswell, GA
Thank you all alot, i guess i did not print the hole thing. has anyone ever replaced one?
Reply
Old Sep 4, 2002 | 05:25 PM
  #5  
RangerJoeEOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 131
Likes: 0
From: Roswell, GA
is the "Solenoid valve-split air bypass" (as in http://home.rmci.net/panther/89_91ecu.htm) the same as "split air Solenoid valve" (in the FSM)? I hope so
Reply
Old Sep 4, 2002 | 05:27 PM
  #6  
RangerJoeEOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 131
Likes: 0
From: Roswell, GA
never mind i got it I am a dumb ***

Last edited by RangerJoeEOD; Sep 4, 2002 at 05:31 PM.
Reply
Old Sep 4, 2002 | 05:38 PM
  #7  
spazzytroy's Avatar
20b Tinkerer
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jan 2002
Posts: 240
Likes: 0
From: TX
hey guys, how bout a way to check codes for us peeps w/ S4's. You can get thoes code checkers at Autozone for like $30 (hopefully you get more than you pay for ), would these even work, or is there another way?
Reply
Old Sep 4, 2002 | 10:37 PM
  #8  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Originally posted by spazzytroy
hey guys, how bout a way to check codes for us peeps w/ S4's. You can get thoes code checkers at Autozone for like $30 (hopefully you get more than you pay for ), would these even work, or is there another way?
DO NOT BUY A CODE CHECKER FOR THE S4!!!!! Use the L.E.D. setup that you use to check your TPS. I dont have the link, but the tester that you build will cost you about 2 bucks.

Rat

Anyone got the link?
Reply
Old Sep 4, 2002 | 10:57 PM
  #9  
RangerJoeEOD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 131
Likes: 0
From: Roswell, GA
can anyone tell em where you find the split air solenoid valve, i got it FSM page but can find the thing on the car please help, track date in 2 days Thanks again
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM




All times are GMT -5. The time now is 12:30 PM.