rx78788

just wondering i really want a header for my 88 n/a. but i dont' have that much money. could i buy some tubing and make a custom header. or should i just bye one from racing beat. how much power would be lost if i made a custom header?

Drifter101

I think you should buy a used RB header, they usually go for about 100 bucks to 150 used depending on condition and are well worth the price

rx78788

i have been looking for along time for a used one. do you know ware i might find one.

slomo85

iTrader: (8)

mee too...

Matt22

iTrader: (10)

just by a new one. there are many brands out there
does the steel racing beat uses differ from the steel any body else might use. maybe so maybe not. i wouldn't
make one though it would be of much easier and probably much better to jsut buy one new.

I have a header on my 88 gxl and it a a great upgrade.
lates Matt22

rx78788

how much power did you gain? or what i want to know how much was felt form the header?

rx78788

does any one know how much power a Pre-silencer will give you. or should i just keep the stock cat on for the back presure needed for the aux ports to open.

Tofuball

The AUX ports needing backpressure can be circumvented.

If you get a header, replace the cat-back while you're down there.

Bio-Weapon

The problem with making your own is that you don't know the proper length and where to bend the pipes to get the most power. RB has thousands of dollars of R&D into 'tuning' the pipes for maximum horsepower.

jgrts20

u can get a cheap one, i think its a pacersetter not sure, only like 100 buck or something!!

TakumiJr

My whole exhaust is custom and the header is custom to the middle of the car then the two pipes to the rear. The custom header is deff. louder then the RB header and mine's was made with perfect length because it look similar to the length of the RB. The main downfall is mine doesn't have a o2 sensor bunge yet, but im sellin my car , so the person who buys it will get the whole exhaust system.

dorifc3s

trust me making your own will be a bizitch. you gotta mandrel bend em or TIG wel em and make flanges...etc if u have time and money do it if u want.

Matt22

iTrader: (10)

they are al right its a hassle, you get a lot more
power, oh out the header in my opinion, some
say you get jsut a much by useing a downpipe,
but i like the header option. i would add on a
highflo cat as well. lates matt22