2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

how much for paint?

Thread Tools
 
Search this Thread
 
Old Sep 11, 2002 | 06:43 PM
  #1  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
how much for paint?

How much will it cost me to get my car painted? i would like it to look as good as possible with alot of clear. if i were to buy the paint. how much could i get someone to paint my car for?
Reply
Old Sep 11, 2002 | 07:17 PM
  #2  
Turbo II FC's Avatar
Total Balance is Key
Tenured Member: 20 Years
iTrader: (14)
 
Joined: Jul 2002
Posts: 1,196
Likes: 6
From: Texas
Too bad you dont live in Texas. My friend paints cars for only about 500 labor, no parts. Thats a damn good price for labor.
Reply
Old Sep 11, 2002 | 07:32 PM
  #3  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
dern, maybe i could drive drive the fc down there and take a vacation
Reply
Old Sep 11, 2002 | 07:33 PM
  #4  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
so am I looking at about 1000 bucks for normal labor?
Reply
Old Sep 11, 2002 | 08:07 PM
  #5  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
any of my ****** know the answer to my ****?
Reply
Old Sep 11, 2002 | 08:13 PM
  #6  
ryandogg's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 172
Likes: 0
From: ROTARY RESERVATIONS CAMP
https://www.rx7club.com/forum/showth...26#post1027326

heres my recent posts. lost of pic.. it cost me about 450 for the paint.. i didnt 100% of the work..
if you had some one do it for ya.. im guessin itll cost ya. about a G or so.. depending what kind of paint you want.. but seriously.. for paint color- sky is the limit what type, kind, and how mny coats..
cheap paint=maaco look alike
expensive paiint=show look. non of that ricer paint.. zero gloss ****..
Reply
Old Sep 11, 2002 | 08:14 PM
  #7  
banzaitoyota's Avatar
What Subscription?
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 5,926
Likes: 2
From: Aiken SC USA
To do it right:
Soda Blast/Strip paint: 400
DP-40 Epoxy Primer: 120
2K Primer Surfacer:120
2 Qts Base Coat: 60-150
1 Gallon Reducer:45
2 gallons clearcoat: 180
Misc Supplies:100

Total:925 MINIMUM

This is assuming no major bodywork required.

Strip Trim: 3 hours
mask: 2 hours
prime: 3 hours
Bodywork: ?? Cant tell without seeing car 2-24 hours
Primer-Surfacer:3 hours
Block sand: 8-12 hours
Retape/mask: 2 hours
Basecoat:2 hours
Clearcoat:3 hours
Unmask: 1 hour
Rehang Trim: 4 hours
Colorsand Buff: 8-12 hours

Min of 41 hours labor

This is to do it right. It is a bare bones estimate.
Reply
Old Sep 11, 2002 | 08:20 PM
  #8  
RestoTII's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 576
Likes: 0
From: Havre de Grace, MD
I'd like to strip my car and get it cleaned up and have somone local paint it, but I can't get any good responses to who does good work around here. I've seen a few local guys post that they've gotten stuff painted near me, but I still haven't gotten any good estimates. The only ones I've gotten were Maaco (~$700) and a local guy ($2000-20,000). Hopefully I can find someone that can do better quality than maaco for around the same price.
Reply
Old Sep 11, 2002 | 08:20 PM
  #9  
ryandogg's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 172
Likes: 0
From: ROTARY RESERVATIONS CAMP
yo

Originally posted by banzaitoyota
To do it right:
Soda Blast/Strip paint: 400
DP-40 Epoxy Primer: 120
2K Primer Surfacer:120
2 Qts Base Coat: 60-150
1 Gallon Reducer:45
2 gallons clearcoat: 180
Misc Supplies:100

Total:925 MINIMUM

This is assuming no major bodywork required.

Strip Trim: 3 hours
mask: 2 hours
prime: 3 hours
Bodywork: ?? Cant tell without seeing car 2-24 hours
Primer-Surfacer:3 hours
Block sand: 8-12 hours
Retape/mask: 2 hours
Basecoat:2 hours
Clearcoat:3 hours
Unmask: 1 hour
Rehang Trim: 4 hours
Colorsand Buff: 8-12 hours

Min of 41 hours labor

This is to do it right. It is a bare bones estimate.
hey you.. her remeber me.. i recently took your advice on how to paint my car.. and you also suggested paintucation.com..
heres my link to mythread on how my car look like

https://www.rx7club.com/forum/showth...26#post1027326

let me know what you think
Reply




All times are GMT -5. The time now is 04:38 PM.