how come no one makes anything cool for our cars
#1
how come no one makes anything cool for our cars
I don't know...it just dosn't seem fair that 3rd gens get all the cool company stuff...and it seems we (2nd gens) get the left overs.. what's up with that, dosn't it get on your nerves sometimes?
for instance, go to the "for sale" section in the 3rd generation part...you'll find many many aftermaket stuff for sale.. but when you go into the 2nd gen part it's nothing but part cars or stock items, very few times do you see a lot of aftermaket stuff for sale...
i don't know i guess i just wanted to get this off my cheast, what do you guys think?
for instance, go to the "for sale" section in the 3rd generation part...you'll find many many aftermaket stuff for sale.. but when you go into the 2nd gen part it's nothing but part cars or stock items, very few times do you see a lot of aftermaket stuff for sale...
i don't know i guess i just wanted to get this off my cheast, what do you guys think?
#2
Rotary Freak
Join Date: Aug 2001
Location: Ottawa, Ontario
Posts: 2,788
Likes: 0
Received 0 Likes
on
0 Posts
I think you're about as wrong as they come. There are MILLIONS of companies with 2nd gen aftermarket support. The reason why nobody sells the shiat is because they keep it for themselves
#5
wish my car was faster...
Join Date: May 2003
Location: flower mound, tx
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
i have to agree with u somewhat mrb63083, i noticed that most of the better products are made for the FD. take brake kits for example, every major brake manufacture makes kits for the fd, while the fc gets a couple. its jsut because its newer, im assuming that it was the same sort of deal when the fc's just came out and the 1st gens were being left out. theres still lots of good products for the fc, just harded to find and a little limited
#6
13B N/A POWA!
Join Date: Apr 2002
Location: Everywhere, WRLD
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
I have to highly disagree...now if you mean body mods then you might have a small point. I don't really agree that we don't have parts to buy, maybe it's that you're not searching hard enough .
Btw, Integra88LS you have one of the most beautiful sigs on the planet .
Btw, Integra88LS you have one of the most beautiful sigs on the planet .
Trending Topics
#9
Former Moderator. RIP Icemark.
I have made numerous parts for the FC. From CF vents, to PD replacements.
The problem is that very few 2nd gen owners want to spend any real money to get quality aftermarket parts.
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
Why in the world would I want to make and sell something that I could only sell a cost to make???
I am sure most aftermarket parts manufactures feel the same way.
The problem is that very few 2nd gen owners want to spend any real money to get quality aftermarket parts.
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
Why in the world would I want to make and sell something that I could only sell a cost to make???
I am sure most aftermarket parts manufactures feel the same way.
#13
Eat Rice Don't Drive it.
iTrader: (3)
Originally posted by Icemark
I have made numerous parts for the FC. From CF vents, to PD replacements.
The problem is that very few 2nd gen owners want to spend any real money to get quality aftermarket parts.
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
Why in the world would I want to make and sell something that I could only sell a cost to make???
I am sure most aftermarket parts manufactures feel the same way.
I have made numerous parts for the FC. From CF vents, to PD replacements.
The problem is that very few 2nd gen owners want to spend any real money to get quality aftermarket parts.
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
Why in the world would I want to make and sell something that I could only sell a cost to make???
I am sure most aftermarket parts manufactures feel the same way.
#15
Junior Member
Join Date: Jun 2003
Location: dallas, tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
they make cooler stuff for 3rd gens, as in yes, majorly body mods...they make like 234323 different sleek headlight kits for the 3rd gen...i mean we get the eastbear and in my opinion it isn't that great...other than that the only one i've found is the re one but to use it you have to have the full re hood/bumper ect...
#17
Eat Rice Don't Drive it.
iTrader: (3)
The body kit mania is because of one particular movie. If you would have seen vin deisil in an FC we would have about 1,000,398,409 sleek headlight kits.
If you want your headlight kit MAKE YOUR OWN.
That way you can say its a ******* ONE OF A KIND KIT that no RICE BOY CAN BUY at pep boys.
If you want your headlight kit MAKE YOUR OWN.
That way you can say its a ******* ONE OF A KIND KIT that no RICE BOY CAN BUY at pep boys.
#19
Rabbit hole specialist
iTrader: (11)
Originally posted by Icemark
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
For example, a couple years back I made a CF center vent replacement. Worked just like the factory, even mounted the same. But it cost me about $40 not including the R&D and mould. So just to break even I needed to sell them for $50-60 each. To truly make a profit, I had to sell them for $70. But everyone that said they wanted to buy one only wanted to pay $40.
#21
FD title holder since 94
iTrader: (1)
No one buys them anyway. Like Mark said, no one wanted to pay 70 for the CF vents, Chuck at Rotary extreme can't build enough interest to build anything. I'd even bet Dave (fc3s.org) has taken a bath after making the hoods for the FC, after many people WANTED them..I wonder how many he's sold and if he's broke even yet on them.
Tim
Tim
#22
earning these was better
Join Date: Mar 2002
Location: Richardson TX
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 1987RX7guy
The body kit mania is because of one particular movie. If you would have seen vin deisil in an FC we would have about 1,000,398,409 sleek headlight kits.
If you want your headlight kit MAKE YOUR OWN.
That way you can say its a ******* ONE OF A KIND KIT that no RICE BOY CAN BUY at pep boys.
The body kit mania is because of one particular movie. If you would have seen vin deisil in an FC we would have about 1,000,398,409 sleek headlight kits.
If you want your headlight kit MAKE YOUR OWN.
That way you can say its a ******* ONE OF A KIND KIT that no RICE BOY CAN BUY at pep boys.
#23
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally posted by 1Revvin7
Because most FC guys are cheap, young of age and most can only afford cold air intakes, lol....
Because most FC guys are cheap, young of age and most can only afford cold air intakes, lol....
I'm not sure about the age difference because there are a lot of really young FD owners, but I totally agree about being cheap. The only reason most of the 2Gen owners on this forum would like to see more custom parts offered is so that they can copy it and try to make it themselves for less.
Originally posted by MaTT_FoULk
FD owners spend more money and have more money to spend so its only logical that they have more parts availible to them.
FD owners spend more money and have more money to spend so its only logical that they have more parts availible to them.
#24
Registered Loser
iTrader: (6)
Join Date: Dec 2002
Location: Whiterock
Posts: 2,224
Likes: 0
Received 0 Likes
on
0 Posts
There are so many aftermarket parts for FCs, but they never get imported over here. Checkout Japanese auctions, tons of cool stuff and its cheap as hell too. Just gotta import it and pay all the fees which make it expensive.