Hose going to intake tube??
Thread Starter
Joined: Mar 2001
Posts: 2,721
Likes: 0
From: c-town AKA Crofton Md
Hose going to intake tube??
Ok guys,How important is this line--can it be disconnected--reason I am asking is ,I installed a new intake--with no connection for this hose and now when the car hits 4000 rpm it falls on its face,then come back then falls again--drives fine under a light load.--here is a pic of the line I am talking about.
I'm a boost creep...
Joined: Jan 2002
Posts: 15,608
Likes: 8
From: Auckland, New Zealand
It supplies air to the BAC valve, so if you leave it open the BAC valve will be sucking in unfiltered, unmetered air. Basically you'll have a big vac leak.
That won't cause the problems you describe though, neither would fitting a new intake. That sounds like a secondary injector probelm. Check they're both plugged in properly.
That won't cause the problems you describe though, neither would fitting a new intake. That sounds like a secondary injector probelm. Check they're both plugged in properly.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
