2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

HKS circle earth

Thread Tools
 
Search this Thread
 
Old Mar 16, 2003 | 08:20 PM
  #1  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
HKS circle earth

Just a little write up, my brother ordered me the HKS circle earth ground kit from our suppliers (apparently they make a set for the FC specifically) as a little gift. I installed it yesterday, skeptical of course and though I didn't notice any power/curve changes there were some good advantages like no voltage drop w/ lights and accessories on & my foot on the brake at redlights during the night (used to be a problem bc of the UR under drive pulley), the 3800 rpm hesitation is completely gone and the car's warm up sequence on a cold start is smooth as silk now. After this tank of gas I'll see if the mpg improved at all, I consistently get 15 mpg for city driving so we'll see if there are any changes. It retails for $125 and thats a lotta money for wires/hardware and a distribution block but thankfully the kit is high quality and very complete. You can make the same basic kit with some good wire/connectors from your local car stereo installer and some stuff from home depot for just a few bux. I wouldn't buy it myself but it was a cool little present I guess and it made some worthwhile improvements!! pics available tomorrow...

Last edited by jon88se; Mar 16, 2003 at 08:23 PM.
Reply
Old Mar 17, 2003 | 10:08 AM
  #2  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
bump
Reply
Old Mar 17, 2003 | 12:09 PM
  #3  
skyypilot's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 354
Likes: 0
From: Connecticut
What the hell is a circle earth ground kit??
Reply
Old Mar 17, 2003 | 12:52 PM
  #4  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
Here's the link from HKS:

http://www.hksusa.com/products/?id=1506

Sure, it's pricey but it was a cool gift
Reply
Old Mar 17, 2003 | 01:13 PM
  #5  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
How many grounding points with the kit?
Reply
Old Mar 17, 2003 | 01:49 PM
  #6  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
4 leads from the negative on the battery mount to the distribution block then 4 more leads from the distribution block to various chassis points. As actual ground points on the car there are 4 and the wires are pre-cut to length. All points are 10mm bolt locations on the chassis and the instructions show you which points to use (on a TII). Ground points were as follows:

-coil pack (closest to the driver)
-Existing 10mm bolt ground next to one of the wiper motors
-2 seperate poins by the intercooler

Since I have no intercooler (NA) I substituted those 2 points for one by the intake manifold and the other on a bracket w/ a 10mm bolt direct to the chassis on the firewall. I can attach pics tonight when I get home.
Reply
Old Mar 17, 2003 | 02:47 PM
  #7  
KiyoKix's Avatar
13B N/A POWA!
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 1,013
Likes: 0
From: Everywhere, WRLD
Sounds good to me man, I've been waiting to see the ground points on that system for a while now. Thanks again man
Reply
Old Mar 17, 2003 | 02:50 PM
  #8  
pillage6's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 1,060
Likes: 2
From: Jax, FL
Damn, all my brother ever gave me were wedgies.
Reply
Old Mar 17, 2003 | 03:40 PM
  #9  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
we recently moved shops so I spent a buncha long nights w/ the guys haulin stuff in our race trailer from deer park to smithtown back and forth (dude compressors are heavy haha). I guess he figured all the wendy's I ate wasn't a proper thank you (from wednesday to saturday night we fully packed and loaded all our cars, tools, showcases etc...coming home at firday and saturday night at 4 a.m. is NO fun when yer out doin that kinda work hehe but hey, the new place is immaculate, the showroom/office came out great and i got a ground kit I can also get pics of the showroom and all our cars if anyone is interested
Reply
Old Mar 17, 2003 | 03:47 PM
  #10  
pillage6's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 1,060
Likes: 2
From: Jax, FL
I would like to see the ground kit.

I don't know if it is normal, but when reading the voltage meter on my turbo timer the voltage fluctuates.

Anyone else experience this?
Reply
Old Mar 17, 2003 | 07:11 PM
  #11  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
I tried posting pics but they don't work...I used to be able to link them from my hard-drive all the time and now I just get a "not available" page. They are sized within limits, what gives? We can't post pics that aren't already published someplace?? ideas??
Reply
Old Mar 17, 2003 | 11:49 PM
  #12  
Driftfc3s's Avatar
Final Form
Tenured Member 15 Years
iTrader: (11)
 
Joined: Jul 2001
Posts: 832
Likes: 2
From: Houston, TX
email me your pix.
driftfc3c@yahoo.com
I'll post em for ya.
Reply
Old Mar 18, 2003 | 08:06 AM
  #13  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
do we need hosts for all pics now? that would stink!! I can send them later tonight
Reply
Old Mar 18, 2003 | 08:43 AM
  #14  
Senior Member
Tenured Member: 20 Years
 
Joined: Apr 2002
Posts: 259
Likes: 0
From: Jersey
Originally posted by pillage6
Damn, all my brother ever gave me were wedgies.
Reply
Old Mar 18, 2003 | 04:41 PM
  #15  
rx7power's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 194
Likes: 0
From: Hawaii
Here's another

www.sunautomobile.com

another grounding kit. Enjoy
Reply
Old Mar 18, 2003 | 04:48 PM
  #16  
eljefe62's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 274
Likes: 0
From: Houston Tx
post all the pics you can, i like seeing what other people do to their cars to get ideas for mine
Reply
Old Mar 18, 2003 | 05:16 PM
  #17  
pillage6's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Nov 2002
Posts: 1,060
Likes: 2
From: Jax, FL
Price is almost the same, but you get pretty colors with www.sunautomobile.com .
Reply
Old Mar 18, 2003 | 08:05 PM
  #18  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
seriously, anyone have any idea why i can't attach pics like I used to?? it's frustrating the **** outta me!! they aren't too big or anything, I just keep getting the refresh page. WTF?!?!?!?!?!?
Reply
Old Mar 18, 2003 | 08:56 PM
  #19  
jreynish's Avatar
New Project on the Way...
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 3,764
Likes: 6
From: Yellowknife, NT
i had to start hosting every pic i wanted to post because i could not attach anymore! If you want someone to host them email them to me and i will host them,
jreynish@shaw.ca
Reply
Old Mar 18, 2003 | 09:55 PM
  #20  
jreynish's Avatar
New Project on the Way...
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 3,764
Likes: 6
From: Yellowknife, NT
here you go here are the pics,




Reply
Old Mar 18, 2003 | 10:04 PM
  #21  
jon88se's Avatar
Thread Starter
Eat, sleep, work, mod.
Tenured Member: 20 Years
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
Jreynish, thanks for hosting but it's not workin...whats w/ this site!!!
Reply
Old Mar 18, 2003 | 10:04 PM
  #22  
Driftfc3s's Avatar
Final Form
Tenured Member 15 Years
iTrader: (11)
 
Joined: Jul 2001
Posts: 832
Likes: 2
From: Houston, TX
Your pix:

Reply
Old Mar 18, 2003 | 10:59 PM
  #23  
jreynish's Avatar
New Project on the Way...
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 3,764
Likes: 6
From: Yellowknife, NT
oh **** sorry i forgot not everyone is on the shaw network sorry guys' here are the correct links!





Reply
Old Mar 18, 2003 | 11:00 PM
  #24  
jreynish's Avatar
New Project on the Way...
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 3,764
Likes: 6
From: Yellowknife, NT
do they work now?
Reply
Old Mar 18, 2003 | 11:01 PM
  #25  
Driftfc3s's Avatar
Final Form
Tenured Member 15 Years
iTrader: (11)
 
Joined: Jul 2001
Posts: 832
Likes: 2
From: Houston, TX
ha ha! I beat you to it!
Reply



All times are GMT -5. The time now is 03:47 AM.