viperkiller7

iTrader: (11)

I have an super sequental bov welded onto the pipe coming out of the turbo to the fmic... my question is when i shift i hear a fluttering sound which is actually the air come back out of the intake. I don't have the loud whistle effect on mine case i took thqt piece out so i can't really hear any thing else. if i let the car idle and rev it nothing comes out of the bov.. i have the vacum line on that lil nipple on the upper intake. Any info will help thanks
Rodney

also i tried adjusting that not in and out nothing happened

RX7FC3S

You sure it's air coming out of the intake? The HKS SS blowoff makes a fluttering sound since it has two valves. You can hear the smaller one open first then the larger one...atleast thats how it is on mine, but then again, I have the older style one and not the newer model.

twint78

try loosening it more.i could be wrong.my friends does this (ssbov).but i know on my car(3rd gen)that means compressor surge.u might have to loosen the spring.

viperkiller7

iTrader: (11)

no air comes out at all. i rev it at idle let off and no air comes out...

twint78

ur spring is too tight.if ur pushing 10 lbs and down loosen the spring for lower boost mode.tighten it up when ur pushing 15 and up.

viperkiller7

iTrader: (11)

Heres the deal now... i went outside and popped my hood... did a line lock and had my friend hold his hand over the bov to see if any airt came out when i let off hte gas.. none came out.. the bolt was about half way out.. it was around 10 psi

twint78

hmm,not too sure then.who did u buy it from i would call them up and get some customer service.just be like hey i bought this bov i loosened the spring up and it is not working it is not putting out any backpressure.sorry couldnt be any help.

RETed

Where exactly is the vacuum line on the upper intake manifold?


-Ted

twint78

yknow what i forgot to even think of that?

viperkiller7

iTrader: (11)

Right next to where the acv use to be.. it worked before i had it welded on the pipe..i think

twint78

did they cut a hole out b4 they welded it on?

viperkiller7

iTrader: (11)

yeah they did...... that was funny though

twint78

hmm i dont know what to tell u then?it worked when it wasnt welded and did work when welded?not blocked?try unhookin the hose going into the manifold?try hookin it up the old way?just start playin with **** man

1FastT2

iTrader: (1)

Bring that bitch over to me, I'll figure it out for ya!

viperkiller7

iTrader: (11)

yo brian get ahold of me.......610 7793269