2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

HELP!!! when ac on, engine revs up 2 like 3,000 rpm!!!

Old Jul 19, 2007 | 07:07 PM
  #1  
nittoracer753's Avatar
Thread Starter
Full Member
 
Joined: Jun 2007
Posts: 50
Likes: 0
From: texas
HELP!!! when ac on, engine revs up 2 like 3,000 rpm!!!

do i need freon?? i just purchased the car and prev owner didnt mention anything bout ac. he sayed i t need a recharge or something i dunno.
Reply
Old Jul 19, 2007 | 07:17 PM
  #2  
Phantomkid's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Nov 2005
Posts: 541
Likes: 0
From: united states
Im not to sure about our systems but if we have a low pressure cutoffswitch if there was a low charge that would make low pressure and the ecu would turn off the compressor clutch and the engine would run like the ac was not on. im not sure how our system works i just ripped it out. I wish i could be more of a help but not having the system and knowing its operation im pretty useless. Um most systems have a input to the ecu when the ac is on to increase the idle to keep the engine running with the extra load of the compressor, but 3000 seems alittle excessive. ps..freon is r12 i think... the system is r134a.
Reply
Old Jul 19, 2007 | 11:22 PM
  #3  
imloggedin's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 850
Likes: 0
From: MO
the bac valve lets extra air in to up the idle when you turn the AC on. make sure its operating correctly. what rpm do you idle at normally?

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/howto-rough-idle-diagnostics-672127/ look at post #8 for instructions
Reply
Old Jul 19, 2007 | 11:24 PM
  #4  
imloggedin's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 850
Likes: 0
From: MO
just a note. when the engine is warmed up and running (like the fsm says) when you unplug the bac valve the rpms should drop. make sure thats happening.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
Tannergsl-setarga7
1st Generation Specific (1979-1985)
2
Aug 18, 2015 03:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:52 AM.