help no interior lights work...
#1
Rotary Power..
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Long Island, NY
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
help no interior lights work...
i was just working on my car hooking up my subs, deck, and amp. when i finally got the wiring figured out (guy i baught it from riged the whole thing) and the deck working i had to find out why my amp wasnt working so i hookd everything up for the amp and wala it works!... so then everything was good, as soon as i hook my subs up bam everything but my interior lights shut off (amp,deck,subs) so i figured loose wires so i hooked it back up tight and it happend again long story short it happend about 2 or 3 more times until the interior lights including my clock and the hatch light all turnd off. the amp shorting out happend to me once before and that was when my batery wasnt charged enough but i knew it was this time because i have been driving it and its been through its cycle. i dont know if theres a fuse for strickly that section or what but if this or anything like it happend to anyone please help. Thanks in advanced.
#3
Rotary Power..
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Long Island, NY
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
i checkd all of them the weird thing is is the fact all my amp fuses are perfect the deck fuse is perfect and so is the fuse box its self now im just wondering if its a deeper problem also the clock flickerd on and off when i hit the interior light to go on the light didnt go on but it showed the time and as soon as i hit it again it disaperd
#6
Rotary Power..
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Long Island, NY
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
87 t-66 thanks a lot you were right but does anyone know how i can avoid this happening again? any tips on wiring my amp? or will this happen again if i hook everything back up?
#7
Former Moderator. RIP Icemark.
going through an aftermarket fuse box? Not going through the stock fuse box, correct?
If the room fuse is blowing (it is used as clock and radio and ECU memory as well as the dome lights) then chances are either the wire is shorted or mis-wired at the back o the radio.
If the room fuse is blowing (it is used as clock and radio and ECU memory as well as the dome lights) then chances are either the wire is shorted or mis-wired at the back o the radio.
Trending Topics
#8
Rotary Power..
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Long Island, NY
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
yea i think i might wire my deck to the powersupply and then run the amp with the subs to the back of the deck to the amp wire im just worried about blowing another fuse
#9
Smells like 2 stroke.
I wired up an aftermarket stereo and accidentally let the power wire for the stereo touch ground. Boom. No more room fuse. Just hook it all up right, replace the fuse, and don't worry about it.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM