Help with my door.
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Fayetteville, NC
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Help with my door.
I recently posted a question about door locks...well i took apart my door lock, and fixed the lock cylinder. When i put it back together, I thought that i put all the rods and stuff back together properly. I guess i was wrong though, cause when i shut my door it wouldnt open....at all. I spent a longass time trying to get it open, but didnt. Does anyone have any suggestions, cause as of now, i either have to open the passenger side and climb in, or climb in through the window.
Thanks a lot guys.
Thanks a lot guys.
#2
Former Moderator. RIP Icemark.
a couple of options, since it sounds like either you didn't hook the release rob back up or it is disconnected at the latch:
#1 pull the passengers door panel off so you can see the mech is the door, then bend a rod/hanger/slim jim that you can use to stick down the driver's side to grab and release the drivers door latch.
#2 remove all the screws you can get to on the drivers door interior panel and then distroy the panel to get at the mech in the door.
#1 pull the passengers door panel off so you can see the mech is the door, then bend a rod/hanger/slim jim that you can use to stick down the driver's side to grab and release the drivers door latch.
#2 remove all the screws you can get to on the drivers door interior panel and then distroy the panel to get at the mech in the door.
#3
Full Member
Thread Starter
Join Date: Jan 2002
Location: Fayetteville, NC
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
I have complete access behind the panel...because i never put the panel back on. It seems as if the handles on either side of the door, dont work. Im pretty sure the door is unlocked, but it still wont open. Is there a way to open it without using the handles...like with a screw driver nside the panel or something. thanks
#6
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
You could have something routed incorrectly, but usually when you rebuild the door mechanism and it doesn't work, the problem is that you need to re-adjust the height of the nylon clamp on the rod. See the top left picture here:
http://www.geocities.com/mcgumrapper/lock
I have had the best luck setting the door lock rod by pressing down on rod while pulling up on outside door handle and pushing the rod towards outside of car until it snaps in place in plastic retainer, and then closing the clasp.
BTW, how are things in Fayettenam nowadays?
http://www.geocities.com/mcgumrapper/lock
I have had the best luck setting the door lock rod by pressing down on rod while pulling up on outside door handle and pushing the rod towards outside of car until it snaps in place in plastic retainer, and then closing the clasp.
BTW, how are things in Fayettenam nowadays?
#7
Full Member
Thread Starter
Join Date: Jan 2002
Location: Fayetteville, NC
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot evil I appreciate the help...Car wise fayetteville is a hell hole, ricers and idiots all over. But everything else is the same...just an everyday crappy town..lol.
Trending Topics
#8
My Bick is Digger
iTrader: (3)
haha fayeteville i used to live in Wilson not too far up 95 from you.......i have a door nightmare with my FC......can open the pasenger side at all....broke the handle fdrom the inside....cant unlock my driver door from the outside...so when i lock my car i have to climb in from the trunk.......to unlock it or just pull the fuses at night cua thee is nothing of value to steal from the inside
#9
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally posted by Dltreezan
haha fayeteville i used to live in Wilson not too far up 95 from you.......i have a door nightmare with my FC......can open the pasenger side at all....broke the handle fdrom the inside....cant unlock my driver door from the outside...so when i lock my car i have to climb in from the trunk.......to unlock it or just pull the fuses at night cua thee is nothing of value to steal from the inside
haha fayeteville i used to live in Wilson not too far up 95 from you.......i have a door nightmare with my FC......can open the pasenger side at all....broke the handle fdrom the inside....cant unlock my driver door from the outside...so when i lock my car i have to climb in from the trunk.......to unlock it or just pull the fuses at night cua thee is nothing of value to steal from the inside
Related true silly story: We had to throw one of our friends in the back of the car to transport him a short distance (kids, don't try this on public roads). We told him he had to sit in back with the hoe, and he was really excited to ride along until he saw that it was a hoe rather than a ho.
Originally posted by guru20
thanks a lot evil I appreciate the help...Car wise fayetteville is a hell hole, ricers and idiots all over. But everything else is the same...just an everyday crappy town..lol.
thanks a lot evil I appreciate the help...Car wise fayetteville is a hell hole, ricers and idiots all over. But everything else is the same...just an everyday crappy town..lol.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM