help me
#27
i love my rice!!!
iTrader: (5)
Join Date: Apr 2006
Location: Anaheim, CA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
mine was idling for 30 mins without the AFM plugged in...
QUOTE=FCED89;7341386]oh and just so everyone knows if the AFM isnt pluged in it idles....[/QUOTE]
ur AFM might not be bad? when i did my T2 Swap, i had accidentally grounded out my O2 Sensor so it threw off every signal, so it idle'd without the afm, but when the afm was plugged in, it would shut off... check your sensors imo.
QUOTE=FCED89;7341386]oh and just so everyone knows if the AFM isnt pluged in it idles....[/QUOTE]
ur AFM might not be bad? when i did my T2 Swap, i had accidentally grounded out my O2 Sensor so it threw off every signal, so it idle'd without the afm, but when the afm was plugged in, it would shut off... check your sensors imo.
#28
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Cheney
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
i dont think its grounded cuz i just unpluged it when i took off my intake and i didnt mess with the wiring
oh and when i hold my foot to the floor it just shuts off
oh and when i hold my foot to the floor it just shuts off
Last edited by Aaron Cake; 09-22-07 at 09:41 AM. Reason: Merge two posts
#30
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Cheney
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
thats with it pluged in and unpluged that it will do that but im going to try this other one when i get it
oh and i did a vac test and its got bout 17pds and i can get it to bout 25 when i rev it and let off
oh and i did a vac test and its got bout 17pds and i can get it to bout 25 when i rev it and let off
Last edited by Aaron Cake; 09-22-07 at 09:40 AM. Reason: Merge two posts
#34
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Cheney
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
i took it all apart with a friend and we cleaned everything and we know its got no leaks and we i floor it it cuts out like its not getting fuel but i will have some look at my wiring
#35
i love my rice!!!
iTrader: (5)
Join Date: Apr 2006
Location: Anaheim, CA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
like its not getting fuel? are ur fuel rails put back on correctly?! maybe u swapped the fuel lines.... one is for in and one is for return... make sure u got the right one on the right way...
#36
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Cheney
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
it was cuz my o.m.p. wasnt pluged in i removed and got a block off plate but wen i pluged it in it ran good everthing work good but it still wont idle but it drives fine