driftingmyFC

These are the o rings that came with my coolant seals from pineapple racing, I need help where they go or at least their name please. Its for a S5 T2.
#1 its four O rings
#4 its two O rings
#5 its two O rings but one is brown and other black
#7 twenty in total

lastphaseofthis

iTrader: (8)

well that the seals to rebuild ya motar.

arghx

iTrader: (3)

2 and 3 look like they are for a front cover to s5 front iron (that's what the white teflon ring is for). 5 might be the LIM o rings

solareon

iTrader: (1)

6 is the tb oring
7 look like 5th & 6th port actuator seals

bumpstart

1- dowel o rings ( oil passage dowel )
2- teflon support ring for timing cover,, unique for s5
3- timing cover oil passage ,, in s5 goes with the teflon support ring
4- ?
5- ?
6- TB hat oring
7- through bolt seals

turboIIrotary

iTrader: (9)

7 might go onto the bolts that hold the motor together i think they are called tension bolts.

Howru

iTrader: (25)

4 - looks about right for the oil pedestal
5 - thermostat neck gasket? Never had to take apart an s5 but it appears the right size

bumpstart

4-- absolutely !
5,, maybe,, maybe not,, i recall the gasket fits around the edge of the thermostat,, much like a door seal fits over a raised edge
6,, while it may be the TB seal ,, possibility ( and also more likely ) its the seal for the rear stat gear

scathcart

1. Dowel o-rings.
2. Front cover.
3. Front cover.
4. Oil Pedestal
5. Oil metering pumps, one for each series.
6. Rear Stationary gear
7. Tension Bolt seals

driftingmyFC

^^Thanks, makes sence, 4,5,6 I wasn't sure about