HELP, HELP, HELP!! Breaking up.
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: Connecticut
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
HELP, HELP, HELP!! Breaking up.
Hey Everyone, 13B4port streetport, Turbo 2 Rotors, Weber 48mm sidedraft carb, TO4 turbo, FMIC. In neutral and in first gear, from exactly 2,000 rpm and on the motor cuts up and is choppy. In first, from 2,000 on, the car is choppy and makes no power until 2nd gear. It's like until the motor has load on it, it doesn't clear up. The exhaust also backfires in between shifts. I'm givng as much info as I can to maybe help this problem. Is this carb related?, timing related? Could an exhaust leak cause this? Any help would be greatly appreciated as this is pissing me off to no end.
#5
Full Member
Join Date: Mar 2002
Location: 415 -> 707
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
.
mine kinda did the same. i disconnected the TPS. it was faulty. runs perfect now.
but i dont have the same set up as you though.
but i dont have the same set up as you though.
Last edited by TheBigOne; 12-03-02 at 09:08 PM.
Trending Topics
#9
Full Member
Thread Starter
Join Date: Oct 2002
Location: Connecticut
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
well guys thanx for all the help, but it was the weld on the wastegate pipe/flange that broke, ans it made the car run awful. getting it fixed. Thanx again.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM