Heater isn't working....
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland, OR
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Heater isn't working....
Ok my heater isn't working. I mean it blows air but its cold... No heat. Am I expecting to have to replace the heater core, because its about to be extra cold this year in Oregon, and I'm not trying to get sick again.... So could ya'll tell me whats good with this issue.
Hasan
Hasan
#4
Jpk3200
Join Date: Oct 2006
Location: San Antonio, TX
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
#6
Jpk3200
Join Date: Oct 2006
Location: San Antonio, TX
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
It seems like the flapper door is not working and allowing warm air in. I would say that either the air mix motor is bad or the logicon control of the air mix motor is bad. I haven't had the problem myself. Maybe someone else has run into this problem.
#7
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland, OR
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Alright koo I'm going to look into my Repair manual and take a look at it.... Thank you.... I just wanted to see if others and the issue and see if they had to replace anything.... Thank you
Trending Topics
#8
My buddy had this problem in his 87. He just rigged a coat hanger to the flapper that lets heat in. Anytime he wanted heat he would just pull the hanger or push to close for cold air.
I wanna say its your logicon. The hot and cold leaver can brake. If you search you can find write-ups about common problems with this system.
I wanna say its your logicon. The hot and cold leaver can brake. If you search you can find write-ups about common problems with this system.
#12
Do a little research and you could find out whats wrong with yours. I've read about the logicons and they have a few problems. My TII does nothing. I'll have to dive into it soon enough.
You may end up replacing it with another one that could have problems. I think you have to soder some connections.
You may end up replacing it with another one that could have problems. I think you have to soder some connections.
Thread
Thread Starter
Forum
Replies
Last Post