Greddy Intercooler Pipe Q's
#1
hEeL To ToE MoFo!
Thread Starter
Join Date: Sep 2003
Location: Delaware Ohio
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Intercooler Pipe Q's
I was wondering if anyone could give me any information they can on pipe 4 of the FMIC setup. the thing is I bought a intercooler off a local guy brand new but he seems to have lost pipe 4 so I cant get any good shots of it on here from anyones installs to see how the bends go so I can get one made. If anyone could help I would appreciate it thanks again.
-Mike
-Mike
#3
the hardest part will be routing it around the power steering. My pipe is actually bent a little so it slides right in the groove with some force. You might try just going from scratch because there are so many little bends and twists in my greddy pipes you could never look at a picture and go from that.
This is going to be a ton of work and alot of aluminum welding. Make sure you wled a bead around the end of each pipe so the coupler has something to grab on to or they will blow off every time you boost and you car will die.
This is going to be a ton of work and alot of aluminum welding. Make sure you wled a bead around the end of each pipe so the coupler has something to grab on to or they will blow off every time you boost and you car will die.
#4
hEeL To ToE MoFo!
Thread Starter
Join Date: Sep 2003
Location: Delaware Ohio
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
nah im good I just need a pic trust me and I dont have anything under my hood anymore just a motor and a alt. The downward angle isnt gonna be hard I have the rest of it done just that one pipe.
#5
240RWHP 270TRQ @ 0.9Bar
Which pipe is number 4? I have a Greddy VSPL FMIC in my FC and if you can tell me exactly which pipe it is in the setup I will pull it and take a pic for u.
-Kenji
-Kenji
Trending Topics
#11
hEeL To ToE MoFo!
Thread Starter
Join Date: Sep 2003
Location: Delaware Ohio
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
I need a Pic of the pipe right before that its the one im missing but thanks for the effort! here is a short vid of her after I timed her up me giving a small amount of gas to her just need that damn pipe!!
http://videos.streetfire.net/video/3...B37FB0869B.htm
http://videos.streetfire.net/video/3...B37FB0869B.htm
Last edited by Villision_Motorsports; 05-04-06 at 11:27 AM.
#12
Slide or die
Join Date: Sep 2004
Location: Vallejo, Ca
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Hold On. If U Make A Pipe It Probably Wont Be Aluminum. These Greddy Pipies Are Alum. Do U Really Want To Make A Pipe And Have It Look That Much Diff Than The Others? Be Kinda Tacky Doncha Think? The Pipe Is Not Gonna Cost That Much To Get From Greddy, About The Same It Would Cost U To Have A Steel Pipe Made. If Ur Making It Ur Self Its Still Just Gonna Be A Hassle For A Pipe That Doesnt Match. Is Ur Fc Clean? Or Bucket Looking? If It Just A Bucket That Goes Fast Then Go Ahead And Make An Ugly Pipe, But If Ur Goal Is To Be Somewhat Clean, Than I'd Get The Right Pipe Know What I Mean?
Thread
Thread Starter
Forum
Replies
Last Post