2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

FUSE FOR GAUGES BLOWS AGAIN, AND AGAIN, ON DOGS 40th B-Day, Today. 1990FC3C, n/a

Old Sep 23, 2005 | 09:14 PM
  #1  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
Angry FUSE FOR GAUGES BLOWS AGAIN, AND AGAIN, ON DOGS 40th B-Day, Today. 1990FC3C, n/a

Took "Daphne" for a mountainous run today for my 40th B-Day. She's runs like a champ, but suddenly blowing the 7.5 amp fuse for the gauges, tach, temp, oil, battery (voltage). Thought I had fixed, found loose wire, and fine for a few days, but after driving really hard, fast turns, high rpms, etc. Have again, for the umpteenth time, checked grounds. At a loss. Anyone?

Thanks in advance, and I will tell you what, this car handles around corners, up and down, sharp, like nothing I have ever driven. The handling, and sheer ground hugging capabilities is beyond explanation. But don't like to drive with gauges not functioning. Only asking for failure.

PEACE THE DOG
Reply
Old Sep 23, 2005 | 09:20 PM
  #2  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
pull the cluster and drive it, if it doesnt blow fuses then the problem is in the cluster, swap it out with another one.
Reply
Old Sep 24, 2005 | 12:12 AM
  #3  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
Thanks Karack. Sometimes in the heat of the moment , my common sense is lacking. Let you know the result.

PEACE THE DOG
Reply
Old Sep 24, 2005 | 12:45 AM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
There are quite a few things on the meter fuse.

Things like the back up lights (tranny or clutch work done recently??)
Gauges
Clock/warning panel
CPU (body computer)
Aux Electric fan (turbos and auto tranny cars)
Mouse belts
Lockout switch on auto tranny cars.
Cruise control.

Anyone of those things shorted out; could blow the fuse. Were you having trouble with any of them recently, or make any modifications???
Reply
Old Sep 24, 2005 | 01:19 AM
  #5  
88rx7gxl's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2005
Posts: 555
Likes: 0
From: Midwest
I dont know what the hell is wrong with your car but... HAPPY BIRTHDAY!!
Reply
Old Sep 24, 2005 | 01:21 AM
  #6  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
Ice, only work done recently, manual trans by the way, is put in new water pump, all new belts while I was there, and O-rings on oil filter housing. Noticed that I had knocked coolant temp sensor wire, but re-attached and fuse was fine then, after all work done. Forgive my ?, but "meter" fuse? Fuse I am referring to is the one by clutch petal, fuse box, never heard of it referred to as" meter " fuse. As far as all other functions, fine. Just oil pressure , coolant temp., and battery (voltage). Thinking maybe has something to do with coolant temp sens, but doesn't make sense. Will pull wire off, replace fuse, and see from there. Thanks, start where you last worked. Again, sometimes dog forgets!

PEACE THE DOG
Reply
Old Sep 24, 2005 | 03:21 AM
  #7  
Tech_Greek's Avatar
Rockn' The Galant
Tenured Member 05 Years
 
Joined: Jan 2005
Posts: 1,901
Likes: 0
From: Shreveport, LA
Dog need to lay off the pain pills to talk normally for one day lol
Reply
Old Sep 24, 2005 | 11:04 AM
  #8  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally Posted by Mombodogs
but "meter" fuse? Fuse I am referring to is the one by clutch petal, fuse box, never heard of it referred to as" meter " fuse.
Reply
Old Sep 24, 2005 | 09:19 PM
  #9  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
Sorry Ice for taking so long to respond, 40th B-day celebration lasted too long, just came too. Exactly, the fuse that I keep blowing is the one that is 7.5 A shown in your photo, the one that says ROOM. Like I said, everything else is working, clock, radio , lights etc..

I'll keep checking, thanks again everyone for taking the time.

PEACE THE DOG
Reply
Old Sep 24, 2005 | 09:27 PM
  #10  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
the room fuse i believe is for the courtesy lamps in the car, do they die when the fuse pops?

i will check the circuit diagram when i have a few minutes.
Reply
Old Sep 25, 2005 | 12:52 AM
  #11  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
You definetly have more knowledge about this than me Karack, but I'm just saying that this is the fuse that keeps blowing. Maybe there is some direct link between this one and something else. I pulled every single fuse, including the ones in the engine compartment, over driver side tire/ main box , and this is only one going out. Have pulled battery terminal off changing fuse, and sometimes works for a while, less than 1 hour driving, and sometimes, it blows on initial ignition start up.

Like previously stated, RPM's, and battery gauge are insignifcant to me, I know the sound , and can check the battery, but fluids are always checked daily, but not while I'm driving, and in case of error, the gauge is obviously there for a purpose.

PEACE THE DOG
Reply
Old Sep 25, 2005 | 12:57 AM
  #12  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
maybethis will help... this is the same layout just with the wires:

Reply
Old Sep 25, 2005 | 01:31 AM
  #13  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally Posted by Mombodogs
Sorry Ice for taking so long to respond, 40th B-day celebration lasted too long, just came too. Exactly, the fuse that I keep blowing is the one that is 7.5 A shown in your photo, the one that says ROOM. Like I said, everything else is working, clock, radio , lights etc..

I'll keep checking, thanks again everyone for taking the time.

PEACE THE DOG
Sure that you don't have a 7.5 amp fuse in the Meter location??? That would kill the gauges
Reply
Old Sep 25, 2005 | 02:11 AM
  #14  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
Ice, honestly, I'm not sure. I'm thinking you might be right, dark and late now, but I'm thinking that the fuse I've been replacing is the third one in. Hell with it, I'm going out to check now. Flashlight.

PEACE THE DOG
Reply
Old Sep 25, 2005 | 10:27 AM
  #15  
Mombodogs's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: Jun 2005
Posts: 759
Likes: 0
From: Vallejo, CA
As always guys, you were right. I was assuming that the spare was, whatever, I screwed up. Yes , the meter fuse is the one for my gauges, and after replacing it, with the correct 15 amp fuse, all is fine.

Thanks again for your assistance, and really appreciate your patience with me.

PEACE THE DOG
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:26 AM.