flooding problems!!!
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: San DIego
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
flooding problems!!!
ok, so my car wouldnt start, so i changed the starter, and it started the first time, the whole first day it started up good, so i go to use it this morning..and it started then it died, then it wouldnt start again, then we pushed it so i could start it and it just went puff!! and it backfired like crazy and smoke came out and didnt start!!! what is it..
#3
Senior Member
Join Date: Oct 2001
Location: Grand Rapids, MI
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Do not start a rotary like you do a piston engine. Do not pump or push and hold the pedal to the floor. Turn it over but never touch or press the gas pedal. I suspect you flooded it if you messed with the gas.
Do a "search", in the upper right top of the screen, on flooding. There will be a ton of posts and you will quickly become an expert on flooding and how to avoid it. Good luck.
Do a "search", in the upper right top of the screen, on flooding. There will be a ton of posts and you will quickly become an expert on flooding and how to avoid it. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
FbFuninthesun
New Member RX-7 Technical
3
10-06-15 08:03 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
10-01-15 09:13 AM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM