Five-lug swap, quick question
#1
Rotary Enthusiast
Thread Starter
Join Date: Apr 2002
Location: Redmond, WA
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Five-lug swap, quick question
Okay, I've searched, and that's how I know to ask this question. Acording to all the parts suppliers, the part number for rear brake hoses is the same for both suspensions. Does that mean that I only nead the front hoses for the swap, and can get all four in stainless in a month or two? I know it would be best to change them all to SS right now, but I need to do this on a budget and finish getting it right later.
#2
Rotary Freak
Join Date: Apr 2002
Location: Boulder, CO
Posts: 1,739
Likes: 0
Received 0 Likes
on
0 Posts
I only changed the front hoses because the 5 lug rears looked exactly the same as the 4 lug rear hoses.
with the front for the 5 lug there should be a section of hose and then a hard line which actually goes into the caliper, where as the 4 lug fronts have just the hose going into the caliper. I believe these are the only ones that need to be changed.
with the front for the 5 lug there should be a section of hose and then a hard line which actually goes into the caliper, where as the 4 lug fronts have just the hose going into the caliper. I believe these are the only ones that need to be changed.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM