fc3s to fd
06-03-07, 04:58 PM
#1
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
fc3s to fd
I have rx7 fd
I want to swap fc3s engine because I have blown engine and no fd engine here
what should I have to make the swap????
and whare can I get a code for engine fd or fc ?
I want to swap fc3s engine because I have blown engine and no fd engine here
what should I have to make the swap????
and whare can I get a code for engine fd or fc ?
06-03-07, 05:03 PM
#2
the swap isn't very easy.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
06-03-07, 05:04 PM
#3
That's what she said...
iTrader: (2)
Join Date: Jul 2005
Location: Socal
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
It will not work. If i were you go to your near by Mazda dealership and just purchase a remanufactured FD engine. It works swapping housing around, but it will cost you more at the end.
06-03-07, 05:36 PM
#4
Leah Dizon > Roast Beef
iTrader: (1)
Join Date: Feb 2007
Location: Québec
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
the swap isn't very easy.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
06-04-07, 02:55 AM
#5
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
the swap isn't very easy.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
FC engine code is 13B-T
FD engine code is 13B-REW
I believe that the japanese cosmo 13B-RE engine has the same mounts as the FD engine.
You'll have a much easier time I suspect of just rebuilding your engine. or tracking down an FD engine.
FD engines can be found for about $2500 US, not sure how much shipping would be to you though.
and no body know how can connect the harnesses
all crazy here
no one know about haltech or .....
and the body who know told me I dont want to meke the swap..
Trending Topics
06-04-07, 05:29 AM
#8
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
I'm using an FD harness/ecu with a 13B-re engine keg.
The engine "longblock" between re and rew is really close, but the porting differences make for poor running (extreme rich) in boost. It would be fine with a standalone.
Best thing you can probably do is have a mazda reman shipped to you it should weigh less than 100 kilos with a crate and take about 1/4 pallet space.
If you get it through one of the good shops you may be able to get them to provide a core for mazda using all junk parts for less than the cost of the mazda core charge.
The engine "longblock" between re and rew is really close, but the porting differences make for poor running (extreme rich) in boost. It would be fine with a standalone.
Best thing you can probably do is have a mazda reman shipped to you it should weigh less than 100 kilos with a crate and take about 1/4 pallet space.
If you get it through one of the good shops you may be able to get them to provide a core for mazda using all junk parts for less than the cost of the mazda core charge.
06-04-07, 05:53 AM
#9
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
Try Japan general Motor
Sunrise
Japan domestic motor
Engine land
and many many others...
06-04-07, 02:50 PM
#11
Where is my Life ?
iTrader: (2)
Join Date: Nov 2003
Location: ottawa canada
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
I think you rbest option is to purchase a mazda reman, there not that expensive and youll get something much better.
http://www.speedmachineperformance.c...lts.asp?Cat=68
Its $ 2700 plus crated and shipped around the world im guessing aroud $ 400-$ 500 max to a dock in kuwait.
06-06-07, 06:23 AM
#15
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
06-06-07, 06:34 AM
#16
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
I'm using an FD harness/ecu with a 13B-re engine keg.
The engine "longblock" between re and rew is really close, but the porting differences make for poor running (extreme rich) in boost. It would be fine with a standalone.
Best thing you can probably do is have a mazda reman shipped to you it should weigh less than 100 kilos with a crate and take about 1/4 pallet space.
If you get it through one of the good shops you may be able to get them to provide a core for mazda using all junk parts for less than the cost of the mazda core charge.
The engine "longblock" between re and rew is really close, but the porting differences make for poor running (extreme rich) in boost. It would be fine with a standalone.
Best thing you can probably do is have a mazda reman shipped to you it should weigh less than 100 kilos with a crate and take about 1/4 pallet space.
If you get it through one of the good shops you may be able to get them to provide a core for mazda using all junk parts for less than the cost of the mazda core charge.
no halteck or microtech should I have .... ?
now I want just to run the car even if I meke it carburator ...
becuse I want to make A big conversion after 1 years.. not now
ok how about connect the fd ecu and harnesses to 13b re engine that was with auto trans , you know the cosmo come with auto>
some one told me if you have fd with manual trans and cosmo 13b re engine you should buy:
1- counterweight. ok from whare ?
2- and what .. how ... you will learn me...? if you did it..
I have fd 93 :
with manual trans and without engine.. noooo engine
any pic if you can .. plz
I dont want reman engine now because the factory of mazda is crazy here in Kuwait no one want to restart my engine..
I order engine from UAE they give me 13b re engine from cosmo not rew ..
I cant order another engine because it is cost for me 1300$..
I want to connect it ..
Last edited by m5q8; 06-06-07 at 06:41 AM.
06-06-07, 07:14 AM
#17
always modding
Join Date: Mar 2005
Location: on a tiny island in the middle of a sea
Posts: 1,667
Likes: 0
Received 3 Likes
on
3 Posts
If you bring you Car to bahrain
I can help you fix it
I have 3 RX7's and i work on them alone
I have enough spare parts to build a spare FD engine lol
I can help you fix it
I have 3 RX7's and i work on them alone
I have enough spare parts to build a spare FD engine lol
06-08-07, 04:11 PM
#18
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
my big broblem is I can't get the car out Kuwait now because no number blate
it is under (jamarik)
I should first turn it on ,,,
If you have another used engine I will be happy
06-09-07, 05:16 AM
#19
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
06-09-07, 05:26 AM
#20
06-10-07, 06:39 AM
#21
Full Member
Thread Starter
Join Date: Dec 2006
Location: Kuwait
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM