FC wont hold idle when warm...
Thread Starter
Banned. I got OWNED!!!
iTrader: (30)
Joined: Apr 2005
Posts: 1,983
Likes: 0
From: So Cal
FC wont hold idle when warm...
i swapped out my n/a motor for another n/a. i removed rats nest, 5 and 6 ports gone ( welded shut) no smog pump and basically it coes down to a bare motor with p/s and alternator. when i start the car it'll idle high and as soon as it getst to normal driving temp, it'll idle at 500rpms or dies. im tired of breaking and pressing the gas with my righ tfoot. any ideas? thanks for any input.
eddie
eddie
idle mixture screw
Look for the screw near the air filter box. This screw is on a little platform and has a L and an R on it. Mine would not idle after a swap and found out the idle air / fuel mixture was off. I richened it up a bit and wammo: nice steady idle.
Try that and report back.
Try that and report back.
Thread Starter
Banned. I got OWNED!!!
iTrader: (30)
Joined: Apr 2005
Posts: 1,983
Likes: 0
From: So Cal
WAIT!!! my car is a s5 is it still the same!?
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM




