2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

fc turbo smokes- please help

Thread Tools
 
Search this Thread
 
Old Jul 21, 2009 | 11:19 PM
  #1  
dori91borofc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (6)
 
Joined: Aug 2005
Posts: 95
Likes: 0
From: fontana, ca
fc turbo smokes- please help

Im looking to buy a s4 turbo. But the car smokes so im a little hesitant. It turns on fine. no problems. I let it run for 10 min and it turned on again fine. At idle there is little smoke. But when i hold the throttle at 4k rpms it smokes. I held it there for about 10 seconds and it started smoking. I let off the throttle and it doesnt smoke as much when it returns to idle. What can it be? i cant drive the car to see if it smokes under boost because the clutch is slipping. I did this 2 times and it smoked. the third time some smoke came out of the front of the car. Hood area..

I am searching here but i would apreciate it alot if someone can help out to decide faster

thanks for looking
Reply
Old Jul 21, 2009 | 11:20 PM
  #2  
BonesZ33's Avatar
Senior Member
iTrader: (5)
 
Joined: Apr 2009
Posts: 277
Likes: 0
From: Burlington, NC
do a compression test.. turbo could be smoking because of a bent fin from a blown apex seal .. or possibly it is overheating due to oil/ water starvation.. good luck.. start with a compression test
Reply
Old Jul 21, 2009 | 11:24 PM
  #3  
dori91borofc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (6)
 
Joined: Aug 2005
Posts: 95
Likes: 0
From: fontana, ca
if it was a bad apex seal it would idle bad and sound erratic when going up and down the rpms. right..
Reply
Old Jul 21, 2009 | 11:27 PM
  #4  
BonesZ33's Avatar
Senior Member
iTrader: (5)
 
Joined: Apr 2009
Posts: 277
Likes: 0
From: Burlington, NC
Originally Posted by dori91borofc
if it was a bad apex seal it would idle bad and sound erratic when going up and down the rpms. right..
you can have fun sitting online and guessing... but if i was you i would just whip out a compression tester so i could eliminate a bad motor as a possibility and go from there
Reply
Old Jul 21, 2009 | 11:28 PM
  #5  
BonesZ33's Avatar
Senior Member
iTrader: (5)
 
Joined: Apr 2009
Posts: 277
Likes: 0
From: Burlington, NC
http://rotaryresurrection.com/2ndgen...ion_check.html
Reply
Old Jul 21, 2009 | 11:40 PM
  #6  
dori91borofc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (6)
 
Joined: Aug 2005
Posts: 95
Likes: 0
From: fontana, ca
yeah ill try that. anyone else?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
Feb 26, 2021 10:12 PM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
ChrisRX8PR
Single Turbo RX-7's
18
Aug 21, 2015 01:56 PM
FD7KiD
Single Turbo RX-7's
1
Aug 17, 2015 11:50 PM




All times are GMT -5. The time now is 07:09 AM.