Klubba

bought a used F-Con and GCC, connected the F-Con to the ECU and the GCC is connected to the boost sensor and what i think is some kinda temp sensor? whats that for?? and how should i connect the GCC to the F-Con? cus now there are no wires between them at all and no unsused connectors

anyway... my car wont start anymorw

Kelimutu

Post this in the swedish rotary society forum.... and you will get answer in Swedish!
Det borde inte vara nåt problem att koppla in GCC, den ska gå rakt in i kabelstammen på f-con, och f-con ksalls en in i original-ecu.... de två sensorerna du fått med är turbotryck (den ena) och det andra är troligtvis en fuel cut defencer... var köpte du grejerna?

HAILERS

For English....try this site http://www.hksusa.com/faq/?ID=1647 Now when you look at that page, you don't see your unit. BUT, if you look at the bottom of the page there are words to the effect that if you call them they might be able to help you with instructions for your unit. I'd E-MAIL them instead, in your case.

I did this search in about five minutes on THE WEB. Seeing as how I don't have a vested interest in this, I'll look no more, but I'd bet if you spent an hour or so you might be able to find the instructions online. Aloha.

HAILERS

Ok, I lied. I found this one a minute and a half after the above post http://www.fc3s.org/how_tos/electrical/fcon.html

I'll look no more.

I did a on line search and put in f-con RX-7 On line as in a Google Search, not this site.

Like this one I just found http://www.scuderiaciriani.com/rx7/FCON_install.html

The WEB is a terrible thing to waste. Think about how it would have helped the Wright Brothers. No snail mail to Lillenthal. Instant response. No more coffe for me today. Too hyper.

HAILERS

Ok, the first one was for PFC F-CON, not your unit. How about this one though http://www.scuderiaciriani.com/rx7/F...stall.html#FCO

EDIT: Nope. That's a PFC F-CON also. But it's out there somewhere. I'd E-MAIL that outfit in one of the above posts I made.

HAILERS

On the FC3S site I read the following words that might help you:

Once again, I am very impressed with HKS and their products. The best part of this was that since I bought the unit second hand, I didn't have any instructions. I gave HKS a call, told them what I have and that I needed help installing it. They gladly helped me out by faxing me the instructions so I could install it with ease. They even included the vehicle specific suppliment for the FC3S. Top notch people there at HKS.

Klubba

Kelimutu: postade den här eftersom jag tänkte att fler skulle läsa den och att man då skulle få bättre chans att få ett bra svar, och som jag skrev, F-Con'en kopplas in i ECU'n, inga prob där, men GCC'n e bara kopplad till laddtrycksensorn och nån annan skumm sak (är INTE en FCD, det har jag ingen än, ser ot som en såndär utomhustermometer, du vet, en lång sladd ochen silversak i slutet) altså, det finns inga kablar över huvud taget eller nånting alls som kopplar ihop GCC's med F-Con'en, köpte på ebay btw

HAILERS: I've seen all those sites alredy, I'm not the kinda guy that just post's everything i wanna know on a forum, I looked for it, didnt find it, all those just explain how to connect the F-Con and not the GCC

http://www.scuderiaciriani.com/rx7/F...stall.html#FCO <-- they show how to connect the boost sensor to the F-Con (maybe i should try that and see if the car starts) but my booost sensor is alredy connected to the GCC so what i need is how to connect the GCC to the F-Con

and this is from HKS-USA:
HKS USA inserts english instructions into the products that ships from HKS USA. If you did not recieved them, please contact the HKS dealer where you originally purchased your product. The HKS dealer should provide you with the instructions for the HKS product. If the HKS dealer can not obtain the instruction manuals for you, you may contact HKS USA's customer service line at (310) 491-3300. Please have your original invoice accessible as you will need to fax HKS USA a copy of the original invoice. If you do not have a copy of your original invoice, there is a charge of $5-10.00 depending on the number of pages included in the instruction manual. HKS will then fax, mail, or email (if applicable) instructions upon receipt of payment. These charges are for customers in the continental United States and Canada. International countries are slightly higher. Please note that not all of HKS USA's English instruction manuals are available in email able format.

HAILERS

Wellllll....in that case, if I reply to this, it will go back to the top and maybe, just maybe someone will see it. Come to think of it, I think I saw this day another thread with HKS FCON in it. Maybe those people can help, They were talking about the chip numbers on the FCON. No mention of the GCC though. Bon Bini.

Klubba

hmm... well, thx for trying guys , guess i have to pay that 10+$ to HKS for the instructions, If they have em that is