2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Engine Is Making Grinding Noises

Thread Tools
 
Search this Thread
 
Old Aug 28, 2007 | 09:35 PM
  #1  
GOGGIN's Avatar
Thread Starter
Full Member
 
Joined: Jul 2007
Posts: 65
Likes: 0
From: Des Plaines
Engine Is Making Grinding Noises

hey my car wont start on its own it has to be push started and when it starts there is a very loud grinding noise from the engine and if i let of the gas it dies instently. any ideas?
Reply
Old Aug 28, 2007 | 09:48 PM
  #2  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
My first idea would be to stop trying to start the car until I found out what was grinding.

Just turn the engine over by hand and see what's up.
Reply
Old Aug 28, 2007 | 10:20 PM
  #3  
CyborgRyu's Avatar
Drift FC
Tenured Member 10 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,602
Likes: 1
From: Cincinnati, OH
Seals, They're Going!!
Reply
Old Aug 29, 2007 | 09:19 AM
  #4  
GOGGIN's Avatar
Thread Starter
Full Member
 
Joined: Jul 2007
Posts: 65
Likes: 0
From: Des Plaines
is there an easy way to check? if my seals are going. if so how much do u think it would cost to get them replaced? or would it be cheaper to get a new engine. i have a 13b in it now can a swap for 13bt? or do i have to change drivetrain as well?
Reply
Old Aug 29, 2007 | 09:23 AM
  #5  
oakback's Avatar
meh
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 801
Likes: 0
From: Tallahassee
Why does it have to be push started? When you try to start it normally, what happens? Does the starter turn over at all?

Have you done anything to the car recently before the problem started?
Reply
Old Aug 29, 2007 | 09:25 AM
  #6  
SpooledupRacing's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2006
Posts: 3,717
Likes: 0
From: Comstock Park, MI 49321
maybe a stuck starter gear.. the car not starting on its own and grinding but starting with a push (not using the starter) sounds more like a starter issue..
Reply
Old Aug 29, 2007 | 09:30 AM
  #7  
oakback's Avatar
meh
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 801
Likes: 0
From: Tallahassee
that's what I was getting at
Reply
Old Aug 29, 2007 | 09:46 AM
  #8  
GOGGIN's Avatar
Thread Starter
Full Member
 
Joined: Jul 2007
Posts: 65
Likes: 0
From: Des Plaines
well it has a new battery new plugs and a new starter. to start it normally it just turns over but wont fire. but when i push start it it runs but with a loud grinding noise coming from the engine. so i drove it around he bloc really sluggish the pulled in to the driveway as soon as i let my foot off the gas it died. any ideas would help me alot.
Reply
Old Aug 29, 2007 | 10:39 AM
  #9  
rotatech7's Avatar
Banned. I got OWNED!!!
 
Joined: Jul 2007
Posts: 373
Likes: 0
From: miami
does it start now???? after it died the last time
Reply
Old Aug 29, 2007 | 01:27 PM
  #10  
GOGGIN's Avatar
Thread Starter
Full Member
 
Joined: Jul 2007
Posts: 65
Likes: 0
From: Des Plaines
no still wont fire will crank but not start
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
Michael Mansour
New Member RX-7 Technical
7
Aug 18, 2015 03:13 AM




All times are GMT -5. The time now is 06:01 AM.