Electrical drain from RET 30A fuse.
#26
Moderator
iTrader: (1)
You don't want to use the White/Green wire as it supplies voltage on a constant basis which complicates things. All you have to do is (w/no key in the ignition) to turn the headlight switch to the first position and identify which Red/Green wire has voltage. Then turn the switch to the off position. Then jumper a wire from this Red/Green wire to the problematic R/B wire and your problems will be solved (I did something similar to this at the headlight switch and it has worked for close to 20 years). The only caveat will be the that the dimmer **** which controls the light intensity of the dash lights will also control the light intensity of the tails and side markers which will not be an issue if you just leave the **** to the fullest position.
Last edited by satch; 11-13-15 at 02:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
fd3s777
Vendor Classifieds
19
12-30-15 12:25 PM
Solid
New Member RX-7 Technical
2
11-18-15 02:42 PM