2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Which electric fan to get?

Thread Tools
 
Search this Thread
 
Old Mar 27, 2015 | 10:52 AM
  #26  
Rob XX 7's Avatar
FC guy
Tenured Member 20 Years
iTrader: (8)
 
Joined: Oct 2002
Posts: 8,713
Likes: 17
From: Long Island, New York
Originally Posted by eage8
I'm running this fan on my v-mount and like it a lot:
https://webstore.spalusa.com/en-us/p...-12v-dual.aspx



the flaps are the key to success
Reply
Old Mar 27, 2015 | 12:27 PM
  #27  
I wish I was driving!
Tenured Member 20 Years
 
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Originally Posted by Rob XX 7
the flaps are the key to success
So says my wife.
Reply
Old Mar 28, 2015 | 10:25 AM
  #28  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Not to toot my own horn, but when I set up my Cosmo cooling system I applied my e-fan knowledge gained over the past bunch of years setting up, observing, making fun of, and advising on e-fans.

Which boiled down to:
-dual fans to allow staged operation
-full rad shroud
-flaps

The fan I ended up using was I believe this:
Dual Powerpacks : High Output Dual 12" Electric RAD Fan/Aluminum Shroud Kit - 25-5/8"W x 17-1/8"H x 4"D

Or at least one of the similar models. Some measurement showed that it would fit the FC with a little shroud trimming. One day I will be replacing my single GM fan (which has worked basically flawlessly) with these fans.

Two stage fans I now consider a necessity and recommend them in every case. Not only do they typically move more air, but the staged operation means much smoother tuning and vehicle operation. One fan is typically enough for 99% of cooling needs around town. You don't end up with that on/off 40A draw from the electrical system nor that roaring air noise.

Edit...Here's the Cosmo cooling system video:
Reply




All times are GMT -5. The time now is 07:45 AM.