2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Door handle help

Thread Tools
 
Search this Thread
 
Old Jan 26, 2018 | 12:21 PM
  #1  
Gofast1995's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2017
Posts: 13
Likes: 1
From: Colorado
Door handle help

Couldnt find what I was looking for with the search bar. What is this piece called so that I can buy a new one? This connects the lever from the outside door handle to the rod that opens the door
Attached Thumbnails Door handle help-photo165.jpg  
Reply
Old Jan 26, 2018 | 12:52 PM
  #2  
insightful's Avatar
rotorhole
 
Joined: May 2017
Posts: 680
Likes: 70
From: retired rotorist

Mazda part # H043-72-411


you're welcome.
Reply
Old Jan 26, 2018 | 04:32 PM
  #3  
Gofast1995's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2017
Posts: 13
Likes: 1
From: Colorado
Thank you so much! That's exactly it. Atkins says that my card won't let me pay right now cause of some security setting, but as soon as that's resolved I can have a working door
Reply
Old Jan 26, 2018 | 06:26 PM
  #4  
insightful's Avatar
rotorhole
 
Joined: May 2017
Posts: 680
Likes: 70
From: retired rotorist
np
Reply
Old Jan 27, 2018 | 01:45 PM
  #5  
Gofast1995's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2017
Posts: 13
Likes: 1
From: Colorado
Turns out that wasn't the piece I needed to make my door handle work, though that did need replacing. I took apart the other door and it looks like all the same pieces are moving so I'm really stumped. Any guesses?

Last edited by Gofast1995; Jan 27, 2018 at 03:02 PM.
Reply
Old Jan 27, 2018 | 02:26 PM
  #6  
Rob XX 7's Avatar
FC guy
Tenured Member 20 Years
iTrader: (8)
 
Joined: Oct 2002
Posts: 8,713
Likes: 17
From: Long Island, New York
take the door handle off and fit the part to it
Reply
Old Jan 27, 2018 | 02:31 PM
  #7  
insightful's Avatar
rotorhole
 
Joined: May 2017
Posts: 680
Likes: 70
From: retired rotorist
Originally Posted by Rob XX 7
take the door handle off and fit the part to it


it's only held in by 2 10mm nuts.
Reply
Old Jan 27, 2018 | 03:03 PM
  #8  
Gofast1995's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2017
Posts: 13
Likes: 1
From: Colorado
I was doing it wrong and trying to put it in backwards, but my door still won't open
The little swing arm doesn't quite move far enough and I can't see why

Last edited by Gofast1995; Jan 27, 2018 at 03:14 PM.
Reply
Old Jan 27, 2018 | 08:32 PM
  #9  
insightful's Avatar
rotorhole
 
Joined: May 2017
Posts: 680
Likes: 70
From: retired rotorist
did you push down lightly on the threaded rod before you clamped down this locking tab?

the FC door handle mechanism itself is also prone to failure so that could be another reason if it's snapped at the pivot like usually happens. this is where they usually break, but this repair won't last:


Last edited by insightful; Jan 27, 2018 at 08:36 PM.
Reply
Old Jan 28, 2018 | 12:00 AM
  #10  
Gofast1995's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2017
Posts: 13
Likes: 1
From: Colorado
I'll try that tomorrow
I've got to reseat the window anyways, son of a bitch wouldn't get in there right
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AngeloRx7
Interior / Exterior / Audio
3
Nov 7, 2001 12:22 AM




All times are GMT -5. The time now is 04:10 PM.