Doing a jdm turbo II s5 swap into a usdm s4 body
08-29-06, 09:06 PM
#1
Newbie
Thread Starter
Join Date: Mar 2006
Location: chicgao
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Doing a jdm turbo II s5 swap into a usdm s4 body
Hello fellow rotor heads I have a question, Im doing a s5 jdm motor (turbo II) and dropping it into a s4 body, I would like to know how different is the engine and body harness gonna be as in emissions crap and etc. , the engine harness is for an s5 but usdm not jdm remember the motor is jdm and the body harness is for an s4. The reason I ask is because some plugs arent matching up into the body harness by the Ecu. Any help would be appreciated Thank You.
08-29-06, 09:17 PM
#2
Junior Member
Join Date: Oct 2005
Location: london, ontario
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
i dont know much on this but i know alot of guys will be telling ya to start off with an s5 car to begin with its much easier overall to install less headaches. i was also thinking about doing this but i figured if i am gonna do a motor swap ill lean more towards a 13b re
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
